|
please install your wheels dead center then align your vehicle. lock to lock i believe from memory is...
full lock left the wheel should be around 4-5... full lock right should be 7-8... it may be reveresed, but my memory tells me this.. i think this is a good idea. your rack should be dead center this way when you align it. |
were did u get that steering wheel from?
|
I got mine off of a local honda forum actually but on line i think passwordjdm.com has them http://passwordjdm.com/Personal-Grin...P1927C368.aspx
|
Ebay for me
|
|
nice! is it sued? I like sued but i heard it wore off when the wheel is used alot.
|
yes, its in sued :)
|
Wow that sparco wheel looks great, how much do those go for?
|
1 Attachment(s)
Word. I have a Personal Nardi as well. Mine is on a momo hub, sparco spacer and a quick release though. The reason it feels all weird is cause you got a crappy hub. spend the $70 and get the real momo 5705 hub. that cheap hub will work fine on a FB3 and a NA3 but it doesn't have the needed spacer for a FC3.
|
Originally Posted by BIZL
(Post 7414997)
nice! is it sued? I like sued but i heard it wore off when the wheel is used alot.
|
where can you buy nardi steering wheels
|
Originally Posted by Dltreezan
(Post 7415589)
It is spilled Swayde dummassis.
|
Originally Posted by hatemy7
(Post 7411495)
were did u get that steering wheel from?
I have a brand new one for $180 shipped if you're interested. |
If you get a new steering wheel, you should get a spacer (unless you're uber-short)...
It lets you see your gauges again, and be in the correct position. |
do we really have to torque the bolt to 35? what if i just have a socket wrench?
|
I bought a sparco hub with this becauae I don't like those cheap ebay ones and I don't trust them.
|
:)
Originally Posted by KhanArtisT
(Post 7415423)
Wow that sparco wheel looks great, how much do those go for?
$145.00 used. |
i have a momo in my car now will that hub fit the nardi
|
Originally Posted by sharingan 19
(Post 7412704)
Ebay for me
|
Originally Posted by FuStEr
(Post 7405119)
what i did is loosen the bolt enough but still on the shaft, than spray wd40 on the shaft where the wheel is stuck on. after that i used a torque wrench and banged the back of the wheel a few times each side till it got loose and pulled it out without hitting my face with the wheel. :icon16:
Rent a steering wheel puller from Autozone for free...or make your own like I did. Two bolts and a little piece of steel, run the bolts in to pull on the center of the wheel evenly, and then pop the spindle with a mallet. POW!!! |
thanks for another advice.
|
I installed the steering today with the sparco hub and the steering wheel. Unfortunately, I did follow all the insturction taking out the steering wheel with advice you guys gave me, but one thing I realize somethig is rubbing on the steering column, the hub seems to be to close to the steering column near the dash"hope someone know what I'm talking about" anyway so when i turn it sound like it is rubbing on to it. What can I do, am I missing something?
thanks in advance, the wheel felt little heavy too. |
installed the steering wheel plus the hub on the car but the hub is rubbing the column, any idea whats going on? thanks
|
Is it rubbing for sure? I noticed a rubbing sound but i think it might have been the springy thing that makes the horn have continuity. The stock wheel is all greesed up where the "thingy" comes in contact with it... I greased mine a bit and the sound is gone.
|
oh, but either way, i think the hub is for FB not FC because check this chart for the momo hub. http://www.shopmomo.com/hubadapterapp.html the 5702 look exactly alike the one I have but is for FB and 5705 is supposely be the one I need. 5705
this is mine http://i136.photobucket.com/albums/q...1/P1000483.jpg http://i136.photobucket.com/albums/q...1/P1000481.jpg here. http://www.shopmomo.com/5705.html |
| All times are GMT -5. The time now is 10:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands