RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Injector Woes (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/injector-woes-279360/)

eyecandy 03-05-04 12:55 PM

Injector Woes
 
I have been tearing down my S4 TII motor and I got to the injectors, and well...... I don't know what to say, they look pretty bad. I am not sure if they can be clean/balanced/etc, or if it woul dbe best to get new ones...

The stock injectors are 550cc/min for both primary and secondary, right? I have been searchin the forum and I belive I have the high impedence, because the last four #'s of my VIN is 9223 (although I am not sure if this matters or not, but the manufacture date inside the door says 8/86, if that is the manufacture date).

Anyways here are the pics, please tell me if you think it is possible to get them cleaned/balanced/etc or better to get new ones...

eyecandy 03-05-04 12:56 PM

Another

1987RX7guy 03-05-04 12:56 PM

I'd send them off and see what they can do. If they can't fix them then get new ones or usable ones from the forum.

eyecandy 03-05-04 12:58 PM

ooops forgot the pic..

eyecandy 03-05-04 12:59 PM

Where do you recommend to send them off to? RC Engineering? Other?

J-Rat 03-05-04 01:11 PM

www.cruzinperformance.com


They do it for $11 instead of $25 that RC charges.

fstrnyou 03-05-04 01:14 PM

i sent mine to RC and they came back cleaned and painted up nice. they flowed just a few cc's short of 550. not enough to be a concern.

eyecandy 03-05-04 01:30 PM


Originally posted by fstrnyou
i sent mine to RC and they came back cleaned and painted up nice. they flowed just a few cc's short of 550. not enough to be a concern.
How bad did yours look? anything like mine?

Also is there any other way to find out if the injectors are High or Low impendence?


All times are GMT -5. The time now is 11:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands