Hi Folks.

Can somebody tell me the wire-collours of the Initial Set Coupler (for adjusting idle speed). Must be a green connector with 2 wires - isnt it? But couldnt find it in the wiring diagram...

Thanks,

Harry

 

the connector is a 2 prong green connector which should reside somewhere in the area of your leading coil pack.

 

Well, thanks - I knew that already. But I wanted to know the exact wire collours!!! Maybe somebody could look it up, because it doesnt seem to be in the wiring diagram :-(


Harry

 

well there only seems to be one green two prong connector near your leading coil. do you have access to the FSM? look at the sticky FAQ for FC, there is a link and it should show you exactly what to do, where its lockated and what color the wires are.

 

Ok. Didn't want to make it that complicated but well...
I use to have a Euro-Spec FC. The Ignition System is like that of a SA with a 13B engine. So the FSM doesnt apply to this one and there is none for the SA available :-(
I use to have a green check connector behind the alternater near the BAC which I dont know what its for since it is undocumented in the "standard" FSM. So maybe the wire-collours of your initial set coupler would help. So thats why I asked for it, and not where it is supposed to be! But some people seem to like make things complicated?!

greetings
Harry

 

The S4 ISC has orange (ECU) and black (ground) wires.

 

Thanks a lot!