RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   i need to know how to do the ATF Treatment Please help. (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/i-need-know-how-do-atf-treatment-please-help-71997/)

Gallon 04-17-02 05:07 PM

i need to know how to do the ATF Treatment Please help.
 
the only place i was able to find it at rx7forums is gone?? And i need to do it. i cant find it on my own, guess im dumb. :( please help me link me or tell me how.

rico05 04-17-02 05:11 PM

Remove the spark plugs. Then, fill the bottom holes with 1/4 quart of ATF in each rotor. Reinstall plugs. LEt sit for at leat 24 hours. Start car. Watch all the pretty white smoke fill the air for 5 minutes. Take it to the highway, and revv the shit out of it. Come home, relace the now ruined spark plugs, and enjoy.

busrex7 04-17-02 05:20 PM

i'm also dumb, but what exactly is the purpose of the atf treatment

biorotary 04-17-02 05:23 PM

here's a link to the write-up...
good-luck man..

http://www.mazspeed.com/atf.htm

Gallon 04-17-02 08:16 PM

thanks all

rxseven 04-17-02 08:54 PM

OR just squirt some into the air plenum through a vacuum port. That way, it can also loosen some junk on the way down to the engine. You will need to jog the motor to distribute it evenly. I prefer mmo to atf.

NevadaLoneWolf 04-18-02 02:06 AM

Don't forget to change the oil also afterwards....after you blow all of it out that is. ATF MAY have gotten into the oil. Better to be safe than sorry, eh?


All times are GMT -5. The time now is 05:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands