RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   help please (turbo) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/help-please-turbo-399826/)

Siete1991 02-28-05 01:16 AM

help please (turbo)
 
hey , i'am about to buy a rx-7 from guy around the block from my house, i'am not sure what year it is(i think it's an 88) but it has a sun roof, roll down windows, and on the left fender it has a GTU on it.i'am new to rotary but i want to know what parts to buy for the engine to make a turbo properly but not spend a furtune on it. thanks

Siete1991 02-28-05 01:33 AM

i'am talking putting a turbo on the 13b motor that is in the car

Project84 02-28-05 01:36 AM

Some models come from the factory with a turbo. Since you don't seem to know much about the car you are looking to buy, you'd be better off just buying a Turbo model. It be easier and cheaper then trying to make a non turbo rotary into a turbo. There is a lot more involved then you know.

Siete1991 02-28-05 01:36 AM

what does that have to do with the car?

Siete1991 02-28-05 01:39 AM

yeah i know that it's a nonturbo 1988 GTU and i want to put a turbo on it and want to know what parts to buy as well

Kory_yahi 02-28-05 01:40 AM


Originally Posted by Project84
Some models come from the factory with a turbo. Since you don't seem to know much about the car you are looking to buy, you'd be better off just buying a Turbo model. It be easier and cheaper then trying to make a non turbo rotary into a turbo. There is a lot more involved then you know.


wtf... I thought the turbo was like a plug and play thing... Don't you just by that sweet little thing that sits on top of the engine that says something like "EXTREME TURBO II INTERCOOLER!!" and it is just like an instant upgrade?

Siete1991 02-28-05 01:42 AM

what ever dude, thanks for nothin dawm!!!! should even have bothered

trochoid 02-28-05 01:52 AM

If you want to learn about the car, search and learn the easy answers first. Once you know more about the rotary, you will be able to ask the questions that need answered.

Not trying to be a dick, but these are not pistons nor Hondas, things work a bit different here. A turbo upgrade can be a major undertaking to be successful, and there is no off the shelf kit for the NA's.

Project84 02-28-05 01:54 AM


Originally Posted by Siete1991
hey , i'am about to buy a rx-7 from guy around the block from my house, i'am not sure what year it is(i think it's an 88) but it has a sun roof, roll down windows, and on the left fender it has a GTU on it.

Not sure the year? You think its an '88? That just doesn't strike me as a responsible move to buy a car and think you know the year of it. BUT anyway, I'll give you some reading material so you can see what is involved. I hope you know its not just slapping a turbocharger and intercooler on the car.

https://www.rx7club.com/2nd-gen-archive-72/how-coverting-n-tii-26647/


http://www.aaroncake.net/RX-7/naturbo.htm


https://www.rx7club.com/showthread.p...ht=turbo+N%2FA

That should keep you busy for a while. And have the calculator out so you can add up the cost of all the parts you'll need.

ddub 02-28-05 02:00 AM

Either buy a full Turbo conversion (engine/accessories, sensors, ecu, harness, drivetrain) and swap it into the car, or read up on all the possibilities (search!) for turboing your n/a which can be more difficult for someone without a lot of knowledge about the engines or tuning them.

Good luck.

ectonine 02-28-05 02:04 AM

it easier to just buy a turbo car, or a complete turbo engine, but if you are hellbound on making the engine in your car turbo you are gonna need alot of little things to make it work. if you aren't very versed on the two engines its gonna be hard for you to make it work and for someone else to sit down and tell you what you need over the internet. pm me and i'll help you as much as i can. i'll even take pictures of all the things you need if you want--jeremie

Siete1991 02-28-05 02:14 AM

thanks man

Aaron Cake 02-28-05 09:20 AM

This thread is being closed because this topic is either covered in the FAQ or has been covered many times before. It is suggested that you make use of the search feature and read the FAQ to find your answer. If you still cannot find what you are looking for, then feel free to post your question indicating that you have already looked for an answer, and someone will probably be happy to help.

Please be aware that this forum has been around for quite a while, and almost every common question has been covered many times in the past. All this information is available by using the search function. Common questions are also already answered in the FAQ.

Some of the questions covered in the FAQ include:

-NA to Turbo conversions
-Electrical problems
-Stereo wiring
-Wheel sizes
-Stock HP and torque specs for all models
-Common abbreviations
-Common electrical problems
-much, much more

The 2nd Gen Forum also keeps an Archive of popular and informative posts. You can access this archive by using the links at the top of this forum.

Helpful links:
-FAQ: https://www.rx7club.com/forum/showthread.php?t=181219
-Search: https://www.rx7club.com/forum/search.php
-Archives: https://www.rx7club.com/forum/forumdisplay.php?f=72

Thank you,
The Moderators


All times are GMT -5. The time now is 03:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands