|
HElp!... im NOT smart enough to figure this OUT!!!
ok so here i am looking at this "STUPID" ass diagram and ya!.. i cant figure this shit out!...
if someone could just help me out and tell me what color wires are the acc passager door speaker drivers door speaker battery wire heres the diagram http://i27.photobucket.com/albums/c1...7/untitled.jpg please and thanks! |
Please read the FAQ. All the stereo wiring info is in there.
|
Originally Posted by NZConvertible
Please read the FAQ. All the stereo wiring info is in there.
i did read it and it tells u what the letters mean and all.. that.. i know what that is.. i just dont quite understand the diagram that much to get the sterio to even turn on.. (the speaker wires.. i get those as for the acc, and the battery wires i dont know which ones they are on the diagram! |
First off...I can't read that diagram...can't see it.
Are you just trying to wire up an aftermarket radio? |
yes i am... im just putting a cheap one for now, and i'll see what i can do to make the image bigger.. sorry about that
|
alright...well assuming you have a wiring harness that came with your radio....you then need a harness that matches up to your car....To get this if y ou don't have it, run to best buy or circuit city, or any reputible car audio shop and tell them you need a wiring stereo wiring harness for a 19XX mazda rx7. Bring that harness home, and wire it together with the harness that came with your cd player. match the colors.
white and gray wires = front speakers green and purple wires = rear speakers red= accessory power yellow= constant power blue or blue/white = aux power (for power antennas and remote amplifier turnon) ...if your power antenna is broken like everybody elses....then there's really no need to wire this up. you don't need the orange wires The only other wire you have to account for is ground...If I remember correctly The harness I got for my 2nd gen didn't have a ground wire... Just extend the black wire coming out of the harness for your radio and run it down to one of the bolts under your shifter surround and using a ring terminal...ground it there. That's about it....turn the car ignition on and press power on the radio...it should all light up and go. |
ok i dont think i made it that clear of what info that im needing to know.. i cant get a harness to just plug and play, i know what the colors on the sterio mean.. i dont know what the colors on the rx-7 harness that has been cut before.
http://i27.photobucket.com/albums/c1...7/HPIM0468.jpg http://i27.photobucket.com/albums/c1...7/HPIM0467.jpg
Originally Posted by X-JaVeN-X
alright...well assuming you have a wiring harness that came with your radio....you then need a harness that matches up to your car....To get this if y ou don't have it, run to best buy or circuit city, or any reputible car audio shop and tell them you need a wiring stereo wiring harness for a 19XX mazda rx7. Bring that harness home, and wire it together with the harness that came with your cd player. match the colors.
white and gray wires = front speakers green and purple wires = rear speakers red= accessory power yellow= constant power blue or blue/white = aux power (for power antennas and remote amplifier turnon) ...if your power antenna is broken like everybody elses....then there's really no need to wire this up. you don't need the orange wires The only other wire you have to account for is ground...If I remember correctly The harness I got for my 2nd gen didn't have a ground wire... Just extend the black wire coming out of the harness for your radio and run it down to one of the bolts under your shifter surround and using a ring terminal...ground it there. That's about it....turn the car ignition on and press power on the radio...it should all light up and go. |
Originally Posted by rx7babygurl85
i know what the colors on the sterio mean.. i dont know what the colors on the rx-7 harness that has been cut before.
LTBlue/Red= 12v+ LtBlue/White= +Accessory LtBlue/Yellow= -power ant trigger Red/Black=+ Lumination White=Factory Amp Turn on Ground to the body, use the 10mm bolt behind the center console front drivers access panel. Do not use the Red/Black as ground it will damage the interior light circuit and dimmer in the car Front Speakers (maximum of a 15 watt peak from the radio): LtGreen/Red= Left LtGreen/Black= Left LtGreen= Right LtGreen/Yellow=Right Rear Speakers (if applicable, if you have the amplified rear speakers again the Maximum of 15 watts peak is all the stock speaker amp input can handle): Brown= Left rear Brown/White= Left Rear LtBlue= Right Rear LtBlue/Orange=Right Rear Note: as mentioned above the power antenna's trigger is ground (or - ). With all aftermarket radio's antenna output as 12 volts positive (+). To make a stock power antenna work you need a relay wired like this: https://www.rx7club.com/forum/attach...postid=1853497 |
oh, so somebody hacked up the factory harness....gay. However, it looks like you could reconnect them back to the factory harness, as they didn't clip the plugs off. If this is the case, I'd reconnect all the wires back to the factory plug and go buy a harness...that's just me tho....other than that, just go by the guide NZ posted from the FAQ.
|
No new harness or plugs are required. The head unit should come with its own unterminated harness, which gets connected directly to the car's wires with bullet connectors or similar. Easy.
|
...of course it's not required...but I'd rather patch it back up, so if I want to change back to stock radio...say if I'm going to sell the car and want my aftermarket one...it's just plug n' play. Just personal preference. I hate a hacked up factory harness.
|
nevermind all ive gotten it!....
|
you must have really yanked on that to get the harness out that far!!!...lol
|
1 Attachment(s)
Well good job. For your next project...
|
| All times are GMT -5. The time now is 02:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands