RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Help: Engine Starts then Dies Unless Gas Pedal Is Pressed (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/help-engine-starts-then-dies-unless-gas-pedal-pressed-522297/)

umli5 03-24-06 07:35 AM

help help!!
 
Hi

Today morning, when i start the engine but it stop immedistely.If i press the gass when engine start ,it works good. when i release the gas , it stop immedistely.Can you guys help me to solve this problem ? My car is 1988 na rx7 .I am in the winnipeg ,manitoba.

thanks

Aaron Cake 03-24-06 09:01 AM

There could be several reasons for this. The most common are large vacuum leaks or problems with the AFM or the connection to it.

wvmgnut 03-24-06 01:31 PM

Check your TPS also mine went bad and would not run with the AC on.

ProjectR13B 03-24-06 02:36 PM

i havce this same problem on an automatic 90 gxl

RX7Racer46 03-24-06 04:00 PM

It could be that your air pump hose came off your air box itself. I had this problem one day when i removed my air box and forgot to place the air pump hose back on the air box. Once i did it ran fine.

ProjectR13B 03-24-06 10:42 PM


Originally Posted by RX7Racer46
It could be that your air pump hose came off your air box itself. I had this problem one day when i removed my air box and forgot to place the air pump hose back on the air box. Once i did it ran fine.

my air pump hose is off because the previous owner put a cone filter on. i am going to try putting an air box on or re routing the air pump hose

'87 turbo II 03-24-06 11:34 PM

mine does that, but if you keep your foot on it and self idle it at around 1,500 RPM for 5 minutes or so, it idles fine, mine just needs to warm up. Also if you drive for about 1 min without the 5 min warm up it can idle at it's firts or 2nd light. Mazda told me it's my bad compression, I'm just going to believe them because they have a rotary expert working there.


All times are GMT -5. The time now is 12:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands