RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   help! car wont start (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/help-car-wont-start-577782/)

namelesspenguin 09-13-06 02:41 PM

help! car wont start
 
the other day i was parking and i accidentally stalled. i didnt really think much of it cuz nothing has ever happened before. anyway, on my way out i go to turn on the car and nothing. try it again, it hesitates then turns on. since it turned on, i didnt think anything was wrong. later that day i go to leave and my car wont start. i tried many times and nothing. so, i think i burned out the starter fuse because when i turn the ignition all i can hear is an almost inaudible eeeeeeeeeeeeeeeee. the car deosnt even try to turnover.
does anyone know where the starter fuse is?
can it be anything else?


p.s. 88 na se

namelesspenguin 09-13-06 05:06 PM

bump

kungfuroy 09-13-06 05:58 PM

First check out all your battery cables, make sure they are connected tight with no corrosion

When you turn the key tothe Start position, do you hear a click or is that 'eeeeee' sound you describe more like something spinning?

rockman7 09-13-06 06:04 PM

your stater cut relay is right next to the clutch master cylinder.. It should be clicking(its a faint sound). Next do like the other guy said check the cables, also check batt voltage, should be 12.6, if not charge it, when all else fails the starter brushes inside the motor/soloniod are sticking. You need to take a hammer down to the starter through the engine bay and smack it a few times... Its an old school trick.. I just had the same problem with mine.

prjct87rx7 09-13-06 08:47 PM

it was probably just flooded to begin with?

ericgrau 09-13-06 09:22 PM

A push start is always worth trying... unless it'll end up in a bad place if it doesn't start.

namelesspenguin 09-14-06 01:59 AM


Originally Posted by kungfuroy
First check out all your battery cables, make sure they are connected tight with no corrosion

When you turn the key tothe Start position, do you hear a click or is that 'eeeeee' sound you describe more like something spinning?

i dont hear a clicking, and the "eeeee" sounds more like its coming from a relay more than sumthing spinning.





Originally Posted by ericgrau
A push start is always worth trying... unless it'll end up in a bad place if it doesn't start.

ive been push starting it for the last couple of days. only to and from work.

rockman7 09-14-06 02:19 PM

eh man just raplace the starter already, did you try any of the directions, what spinning?? the engine rotating but won't start? or it rotates but won't "spark"?

rockman7 09-14-06 02:20 PM

eh man just replace the starter already, did you try any of the directions, what spinning?? the engine rotating but won't start? or it rotates but won't "spark"?

namelesspenguin 09-14-06 02:31 PM

hehe
well i checked all the fuses and lines, and they all seem to be alright
so maybe it is the starter
ill let u kno when i replace it later on today

Black Knight RX7 FC3S 09-14-06 04:53 PM

get a volt meter and start the car. if the volt drops below 9.6, then its the starter. If the voltage doesnt even drop at all, check all the connections from the battery to the starter.

rockman7 09-15-06 03:39 AM

you put the starter on yet :) ??

namelesspenguin 09-19-06 04:48 PM

oh yea, it was the starter! :D
who wouldve known, stalling wouldve killled your starter
but then again, it was the stock 88 starter.

CASE CLOSED

thanx guys

asiansuperstar 09-19-06 07:44 PM

Does stalling the car do any damage to the engine? Because i've recently stalled ALOT.


All times are GMT -5. The time now is 05:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands