Hello, Im new
About to go pick up a 1988 FC Turbo. has a T3 turbo on it, boost controller, turbo timer, S-AFC, fuel cut killer, ignition, its street ported, has a custom exhaust manafold, after market radiator, and a electric fan, few extra things, the guy just spent 3000 dollars on a new rotorary engine from a newer year this happened about 5000 miles ago. it has 555cc primary njectors, and 980cc secondary. I want to do a compression test on it, what should it be at. what should I look for? I need a Rx7 :-D
~Mike 1990 240SX w/ SR20DET 1988 Rx7 (pending) |
Wow. That sounds like quite the set up you're gettin there. How much he askin for it? Anyhow, I imagine that if the mods were done right (and a compression test will show if that is the case) all elase should be cool. With 5k on the engine I bet it is in tip top shape. Got any pics? Welcome to the cult...er forum;)
|
Did you see that on autotrader. I think I have seen that one localy too. It looks pretty nice. You are a lucky bastard!
|
hehe
Yeah, it is suppose to be the "fastest" import in WA.. I guess the guy beat a NSX. not too shabby if you ask me. Im not really sure what the compression is suppose to be at. Any ideas?
Here are some pics |
another
|
Re: Hello, Im new
Originally posted by SilviaS13Drift About to go pick up a 1988 FC Turbo. has a T3 turbo on it, boost controller, turbo timer, S-AFC, fuel cut killer, ignition, its street ported, has a custom exhaust manafold, after market radiator, and a electric fan, few extra things, the guy just spent 3000 dollars on a new rotorary engine from a newer year this happened about 5000 miles ago. it has 555cc primary njectors, and 980cc secondary. I want to do a compression test on it, what should it be at. what should I look for? I need a Rx7 :-D ~Mike 1990 240SX w/ SR20DET 1988 Rx7 (pending) T3 turbine? You mean T4 turbine... with a T3 turbine, how the hell do you get past 5000 rpm's????? |
Re: Re: Hello, Im new
Originally posted by jspecracer7 so I'm the only one who caught that.... T3 turbine? You mean T4 turbine... with a T3 turbine, how the hell do you get past 5000 rpm's????? Oh wait, that's just me :( Anyways, what is that on the rear of the fender? reminds me of an upside 10AE badge. Looks like a nice car if its up to par ;) |
How much is it?
Oh and Bremerton is cool. I spent a few months there back in 97 ;) Mario |
Nice car.
I would like to know the same thing as Node. Thats what I thought it might be. How much are you gettin her for? It seems to be a fine machine. Charles |
Its a Garret T3 Hybrid. It lags until about 3500-4000 RPM... then it seems to do pretty good.
Anyone know what the compression should be at on the rotarys? ~Mike |
It should be at about 110 at each mark, 3 times on each rotor. Anything over 100 is pretty good. If you get that car, take that HKS air filter off fast. Pieces of the foam disintegrate and get sucked up into the intake. Good luck and welcome :)
|
T3
Is using a Garret T3 Hybrid bad news on this engine? I know on my SR20DET it would be a pretty nice turbo... what about this engine? I dont know much about rotarys...
Thanks And Thanks :-) ~Mike |
Re: Re: Hello, Im new
Originally posted by jspecracer7 so I'm the only one who caught that.... T3 turbine? You mean T4 turbine... with a T3 turbine, how the hell do you get past 5000 rpm's????? Is this bad? Im not really sure. The turbine side is HUGE compiared to the compressor size... housing wise. also when it boosts the boost levels dont bounce around or anything.. it just sticks at about 8 PSI. Should I get a HKS T51R-SPL??? is this turbo big enough? ~Mike |
Originally posted by SilviaS13Drift Its a Garret T3 Hybrid. It lags until about 3500-4000 RPM... then it seems to do pretty good. Anyone know what the compression should be at on the rotarys? ~Mike That is NOT a T3 if it LAGS:confused: |
Re: T3
Originally posted by SilviaS13Drift Is using a Garret T3 Hybrid bad news on this engine? I know on my SR20DET it would be a pretty nice turbo... what about this engine? I dont know much about rotarys... Thanks And Thanks :-) ~Mike I want to see pics of this turbo. Originally posted by SilviaS13Drift Is this bad? Im not really sure. The turbine side is HUGE compiared to the compressor size... housing wise. also when it boosts the boost levels dont bounce around or anything.. it just sticks at about 8 PSI. Should I get a HKS T51R-SPL??? is this turbo big enough? ~Mike :confused: |
Re: Re: Re: Hello, Im new
Originally posted by Node Sorry that we don't know turbo lingo.We're only used to N/A FC's w/ automatics in this forum. Oh wait, that's just me :( Anyways, what is that on the rear of the fender? reminds me of an upside 10AE badge. Looks like a nice car if its up to par ;) hrm... you really have an auto? I just bought a '91 N/A auto. it was in good condition, a great deal, and I needed a car (besides, I've always wanted a 2nd gen). I plan on eventually doing an auto->manual swap, but it'll be a while as I'm 17 and making about $300/month after insurance, and I still have to pay for gas and such (isn't the 18.5 gallon gas tank great?). Oh well, it gives me a car (and a nice one at that) to drive till I can afford to do the swap, and I'll more than likely do the intake/exhaust system before then, not to mention I want to replace the mechanical fan with an electric one if only to free up space in the engine bay, and I need to replace some little things in the interior (in fact I need to go to a junkyard sometime soon). But for right now it's running great. it's got 85k on it, though I need to do some rear suspension work. Oh well. Later! |
the gas tank holds 18.5 gallons???? Wow... my meter is really off :)
|
Re: Re: T3
Originally posted by jspecracer7 Okay, with that post you need to stop right there. Do you know how BIG a T51R-SPL is. I have seen the smaller T51S, and it's a BEAST! I wouldn't use it on anything less than a bridgeport motor. And you think your "T3" has lag... :confused: hehe, i was playing about the T51R :-) hehe... thats a HUGE turbo... 102mm compressor wheel... h ehe :-) here is a picture of the turbo... you can only really see the housing... the exhaust housing is almost 3 times bigger... ~Mike |
Re: Re: Re: T3
Originally posted by SilviaS13Drift hehe, i was playing about the T51R :-) hehe... thats a HUGE turbo... 102mm compressor wheel... h ehe :-) here is a picture of the turbo... you can only really see the housing... the exhaust housing is almost 3 times bigger... ~Mike This is what a divided T4 looks like. The turbine to the left is a 60-1 in an .50 a/r. That's a "T4" turbine. https://www.rx7club.com/forum/attach...&postid=874073 |
the exhaust housing looks like that.... but the compressor is small.... it doesnt look like a T3 housing... I have a T25 on my SR20... and it is bigger than the T25.... just doesnt look that big...
Thanks ~Mike |
Originally posted by SilviaS13Drift the exhaust housing looks like that.... but the compressor is small.... it doesnt look like a T3 housing... I have a T25 on my SR20... and it is bigger than the T25.... just doesnt look that big... Thanks ~Mike |
Also T4/T3 hybrid turbines tend to have LARGE compressor sides and modest hot sides, not the other way around.
|
yeah, thats why its wierd.... the compressor housing isnt that big, but the exhaust housing is almost 3 times as big as the compressor....
Ill get more pics of the turbo ~Mike |
All times are GMT -5. The time now is 12:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands