RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   FYI weight reduction (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/fyi-weight-reduction-182041/)

jcina7 05-01-03 07:32 AM

FYI weight reduction
 
just figured id give my input.

all this weight reduction im always seeing people talk about here, take this out, take that out, remove this, ive never heard anyone take these out before..

in the back of the car, theres 2 towing hooks. they are held on by 6 bolts each. these together weigh prob about 5 lbs, and theres another one in the passenger front next to the bottom of the washer fluid bottle.

add them all together, bolts, brackets and all the rocks caught between, its almost 10 lbs.

you can still use the control arms to tow the car if it needs to be towed, or just dont break down...because we all know that rx7's would never do that, but ive also removed my spare tire, so im screwed either way, but that's my $0.02 cents.

Crionics 05-01-03 09:06 AM

Re: FYI weight reduction
 

Originally posted by jcina7
you can still use the control arms to tow the car if it needs to be towed, or just dont break down...because we all know that rx7's would never do that, but ive also removed my spare tire, so im screwed either way, but that's my $0.02 cents.
lol...just make sure you ask for a roll-back :D

Icemark 05-01-03 09:58 AM

if you left one on, you still could be pulled onto a flat bed tow truck.

silverrotor 05-01-03 11:37 AM

When I got Into a jam, the flat bed used my Lower Control Arms to bring It on top.

If my fetish persists on removing what I don't need, than I'll remove those towing hooks too.

DrifterFD3S 05-01-03 11:43 AM

kewl going to do that right now! hehe i think i also have this "fetish" you speak of.....
thanks alot! sounds like the # of pounds ive taken out of the car will soon be around 250 with these hooks gone :D
i think i might have gone overboard......

jcina7 05-01-03 12:31 PM

i took mine off last night. my scale in my bathroom tells me i weigh 610 lbs, so i dont think its right. last i checked, im 145. if anyone weighs these, and the bolts (theres a lot of them) and the rocks stuck in betewwn, let me know how much weight you took off.

every bit counts

Center of The Universe 05-01-03 12:38 PM

Since we are on the subject of Weight reduction. I was thinking... How much does the cars paint weigh? Like 20LBs? (the average paint job is what, like, 2 coats of clear, 3 coats of paint?) What if you just got the car clear coated, no paint. that would be some weight reduction.... It wouldent be good looking. but you know what they say. Funtion over form. :D just a thought.

jcina7 05-01-03 12:45 PM

it would save a little weight. i think it takes a pint of paint to paint a car, not sure its 20 lbs though. just clear coating it over bare metal would look like a delorian, but the bumpers are black. itd look weird.

Center of The Universe 05-01-03 12:53 PM

haah yeh. it was more of a thought, than anything. :D

88IntegraLS 05-01-03 11:16 PM

Or you could prime and do two coats of basic enamel after removing all paint.

Get rid of your tar under the carpet. it is about 30 pounds (I saved it as I chiseled it off and got a rough estimate of poundage). Also get an aluminum hood, do away with the windshield washer setup, rat's nest, air pump silencer, front bumper reinforcement, CPU plate, firewall sound deadening mat, and all the other little mats of sound deadening stuff under the carpet. There is a lot of little stuff that you don't need hiding under the skin of your FC.

BlackRx7 05-01-03 11:49 PM

bah that doesn't wiegh shit!!!!, I removed my rear carpet plus the all the plastice, including the rear storage bins,,, with my passenger seat removed ................I wieght out at 2600 lbs exact!@!

Jimmy325i 05-02-03 12:31 AM

"CPU plate"

So that would be the drivers side kick pannel? ;)

If you meant ECU plate thats not very smart to eliminate, because all it takes is some dumb bitch to kick the harness and the two of you will be stuck for a while. (and you won't be horny at the time either)

88IntegraLS 05-02-03 08:09 PM

My ECU is going to be mounted on the firewall where the AC thing was. I am remounting it. I am a wannabe engineer so I put some thought into it. *phat*

BDoty311 05-02-03 09:02 PM


If you meant ECU plate thats not very smart to eliminate, because all it takes is some dumb bitch to kick the harness and the two of you will be stuck for a while. (and you won't be horny at the time either)
Ha thats funny stuff.:D

Jimmy325i 05-03-03 12:57 AM

I usually don't refer to women as "dumb bitches" but I had just had an encounter with one I do call that often, and she is the one I would expect to have no caution or respect for a nice ride and go fucking things up.

I know plenty of guys who've kicked out $300 speakers mounted in that same location too. So its not just women you have to watch out for.

Icemark 05-03-03 01:07 AM

ah, Jimmy I thought you meant a dog before... now that you meant it was/is a woman I have to warn you...

No derogitory statements like that.

BDoty311 05-03-03 01:10 AM


ah, Jimmy I thought you meant a dog before... now that you meant it was/is a woman I have to warn you...
Now thats even funnier!!:D

88 SE 05-03-03 01:58 AM

Why dont you just strap a 13B to a skateboard, put an RX7 sticker on it, and have the ultimate in weight reduction? :)

Jimmy325i 05-03-03 02:02 AM

I know... my bad. I try to avoid using the terms, but like I said, I was kinda pissed at this girl at the time I posted that.

Soren 05-03-03 11:59 PM

you could try going on a diet and loosing 20 lbs.. you'd look better too ;)


All times are GMT -5. The time now is 01:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands