Fuel pump issues
 

So I have an aftermarket 340lph fuel pump that seems to not want to communicate with the car properly. I can Crank it over it starts the dies out. Now I can jump the pressure test plug and get the car to run and stay running but I'm getting to much fuel it seems maybe due to fuel pressure. Just wondering how to fix this problem so I can go back to factory fuel pressure

N/a or t2? S4 or s5? Going off your name i'm gonna guess a 10thAE . Do you have the MAF hooked up? Will not stay running if its unhooked, or not sitting flat, or has a sticky flapper (heh)

Do you have a aftermarket FPR? If not, your gonna need one being thats not a stock replacement fuel pump

T2 s4 10ae power fc big turbo

Ok sounds good so basically I have to run 12 volts constantly to fuel pump and run an aftermarket adjustable fpr cause I don't have maf or afm or downgrade to 250lph fd fuel pump

if you have a big turbo, what is your EXACT setup? mods, supporting mods and ECU

Borg warner s366 Turblown manifold dual 40mm turbosmart comp wastegates Greddy front mount apexi power fc stock 550 primary injectors injector dynamics id2000 secondaries new ish rebuild with Pinapple racing large street port and rotary aviation super seals 2mm 340lph fuel pump

Fd 2bar map sensor hopefully soon the 3bar gm map sensor when I can get this thing running properly and get it on dyno

Do you have the PFC set up correctly for the ID 2000s? What is the base fuel pressure set to? Has the car ran properly with this set up before?

I has a 1680cc preload tie on it as a base tune for dyno i was running and driving I had stock fpr just changed to aftermarket adjustable yesterday and set it to 32lbs doesn't flood out anymore but woulnt rev past 3000

Sounds to me like you need to find a tuner

K so I think I found my problem. but not sure what went wrong. so when I got the pfc installed they didn't hook up the cor wire so I had the fuel tester jumped everything was running great and what not then all of a sudden. Thing started flooding it self bad like up into my intake and leaking through my lower Intake gasket actually none of the wires were hooked up except speed sensor I hope hooking g these up will fix it. But I just don't get why it would run great then just mess off