RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   fc3s Body kit (ebay) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/fc3s-body-kit-ebay-342675/)

SallBoutzTII 08-27-04 04:17 PM

fc3s Body kit (ebay)
 
I was thinking about getting this....but i dont know about the material they are using....i need help..thanks

http://cgi.ebay.com/ebaymotors/ws/eB...category=36475


There is the link^^^^


-Calvin

RETed 08-27-04 04:24 PM

It says "FRP" or "fiberglass"?


-Ted

Cybaster 08-27-04 04:50 PM

says on the link, FRP - Fiberglass reinforced Plastic

snub disphenoid 08-27-04 04:57 PM

Looks like a replica of the Mariah Motorsports Mode 5 kit.

SallBoutzTII 08-27-04 05:01 PM

i know about that...but is it good material or no? Doesnt that stuff crack easily???

SDrotary-FC 08-27-04 05:17 PM

it is the same one on the erebuni.net site

hugo20 08-27-04 06:01 PM

dont look at it too much, it will crack...

Parastie 08-27-04 06:21 PM

I kind of like it, but maybe that's just me.

b00stedrx7 08-27-04 06:29 PM

why are do the pics look like they do? all jaged looks like someone cut the pic from something

RETed 08-27-04 06:50 PM


Originally Posted by SallBoutzTII
i know about that...but is it good material or no? Doesnt that stuff crack easily???

Sorry to burst your bubble, but MOST body kit parts are made from FRP or some variation of it - yes, CFRP (carbon fiber) is basically the same thing using CF weave and an epoxy-based resin.

There are some body kit parts that are urethane, but they are not very easy to find and generally cost more.


-Ted

Molotovman 08-27-04 06:52 PM

They all look like that because they are shitty Ereibuni Shogun Style 11 replicas. The kit in the picture is an erebuni kit. other companies just make shitty ripoffs of it. www.erebuni.net Check out the website and look at the mazda kits.

thevanillaninja6 08-27-04 06:57 PM

FRP is what they make JetSki hulls out of.. it's good stuff unless you run into something hard

Aesop Rock 08-27-04 07:00 PM


Originally Posted by Molotovman
They all look like that because they are shitty Ereibuni Shogun Style 11 replicas. The kit in the picture is an erebuni kit. other companies just make shitty ripoffs of it. www.erebuni.net Check out the website and look at the mazda kits.

erebunicorp.net i believe

but i like it better then that one kit, ehhh when i remember it i'll post it

Molotovman 08-27-04 07:19 PM

http://www.erebuni.net/ge/mazrx786.htm

Aesop Rock 08-27-04 07:53 PM

im proven wrong


oh molotvman :bowdown: oh molotovman :bowdown:

go to hell :biggrin:

Molotovman 08-27-04 07:55 PM

lol

:)

Cybaster 08-27-04 11:57 PM


Originally Posted by RETed
Sorry to burst your bubble, but MOST body kit parts are made from FRP or some variation of it - yes, CFRP (carbon fiber) is basically the same thing using CF weave and an epoxy-based resin.

There are some body kit parts that are urethane, but they are not very easy to find and generally cost more.


-Ted

yeah, what Ted said =)
my friend's replica TRD Celica FRP kit.... had ALOT of fitment issues....
because it is a replica, the quality is not the best, and the front was VERY wide....

well FRP is not a bad material, as Ted said.... most body kits are made of FRP anyways.....
other friend had CFRP... its good, until rocks hit it.... then that is hard/impossible to fix....
as HE says (haven't really researched) after it is dinged, its gone =)

well if getting FRP kit, i will stay away from "replica" kits =)


All times are GMT -5. The time now is 01:27 AM.


© 2024 MH Sub I, LLC dba Internet Brands