Err new Problem... Check Engine Light comes on when Gas is pressed also new ENG Code
 

well.. i drove my car this morning to work and left it there till now which is 9:15pm

anyways

yesterday i got the Codes 12 and 30 when i did an ecu check...

well on my drive home.. i noticed whenever i pressed the gas pedal.. the check engine light would flash and crap... i let off the gas and it would stop...

well just to see whats going on i just did another ECU check....

seems like Code 12 disspeared and now its code 13 and Code 30...


any clues guys.?

thanks

yeah thanks for the codes.. but i was looking for a possible solution... as to what the problems are

for the lazy people

Code 13 :Pressure Sensor (intake manifold pressure) - Fixed at 29.9 inHg

Code 30:Solenoid, Split Air Valve

thanks guys..

For the truly lazy peoplel.......see if the connector is on the split air solenoid.

For the truly lazy people........check the plug on the pressure sensor to see if it's secure. Then if it is put a meter on the output wire of the sensor and check the voltage per the fsm when the key is to ON. Also check the security of the hose going to the pressure sensor.

neat!