congrats, you did real well for you're first time. Did they let you tape the hood and hatch seems? that would have given you at least another 3mph. I assume all you're under body panels are in place? if you don't have one you should find the aluminum underbelly try for behind the subframe, I have a part number some where i will try to find it for you.
EDIT; :P its mazda part #FB43-56-112d Some where i recall seeing that with all the under body and the Mazda aero kit the car was under a .30 drag coefficient maybe like a .28, making it cut air better than most gen's of Corvette. |
140 mph is not bad at all for a mile run.
|
FCs and FDs have less drag than any stock Corvette due to significantly lower frontal area, even though most Corvettes have a lower cd. In the end, you need less power to go the same speed.
|
Originally Posted by ColinShark
(Post 9957949)
FCs and FDs have less drag than any stock Corvette due to significantly lower frontal area, even though most Corvettes have a lower cd. In the end, you need less power to go the same speed.
|
this sounds like an interesting project good luck on it man.
I did 140 in my old T2 at the time the only mods where haltech e6k 4 720 injectors supra fuel pump stock ports hks to4e bolt on kit greddy front mount avcr boost control running .8 boost http://rx7.cyberosity.com/87GTR/pics/140mph.jpg 5th gear 80 - 140 http://rx7.cyberosity.com/87GTR/pics/80-140.mpg |
Originally Posted by j9fd3s
(Post 9958274)
the C4 vette is .33, aero kit FC is .29.
|
I've done 145 (speedo, so figure like 139) back when she only had 53k on it. Bone stock.
Coulda done more but i got scared. That turn was coming up really quick! You are deffinatly on the right track (not punny) now that you have some more experience. Maybe plan a trip to texas. I would love to run that but hell i can barely afford gas right now. |
to clear up some questions....
no, i had no work done underneath the car at all. zip zero nada. nothing. i need to, and i need to look into making my own aero for the wheels and shit. i also had no undertray or belly pan ( two different things ). as far as corvettes go, they are very slippery, but like mentioned, they arent as slipper as the fc. however, they have 500 horsepower. i has... less than 300. as far as mods go, im pretty moddest. the one thing that i know kept my car going was the fast that i had water injection preturbo, and the fact that i had replaced my radiator with something larger. long sustained high rpm runs will increase the amount of heat produced greatly. i threw in a cork sport radiator ( its a damn nice unit btw. fist perfect) to not have high temps. also, i have not been concerned that im runing only one vbelt in the stock location for all this to drive my alt and water pump. no problems at all. i made the run with new tires as well. got some 452's on fd rims with H&R hubcentric wheel spacers. |
http://www.youtube.com/watch?v=P1lZI...eature=related
look what i found.. its in exactly 54 seconds into the video. anyways, ive been having some problems and such, will upgrade to an air to water inter cooler setup, haltech sport 1000, and fix some boost issues and ill be back at the miami mile. |
Nice project !! good luck !!
|
yah i know. i am now figuring out a front pan and a rear diffuser, and planning on running without a wing. im going to try and fabricate a ducktail/duckbill wing.
|
http://www.youtube.com/watch?v=Gqd3l...eature=related
I just found this video I Thought You Would Like It! |
i did. if they lost that rear wing and removed some aerodynamics, they could have gone much faster.
|
|
Sad to hear that about Dandy FC was really looking forward to their run. That was a beautifully build FC.
|
The dandy team will be back again on the salts before long. might take a couple years. it will be faster this time as they know what to do o get there.
the thing is, i dont care about 210+ mph. i just want to go and break the 200 mark, and get the shirt. so i know i did something great in my life. |
If you went on a ride in a plane i think you can go get that shirt you want.
|
I haven't read the entire thread but I know that the biggest gains on our car would be in making the undercarriage completely flat and smooth.
|
Originally Posted by nauri9
(Post 10179870)
I haven't read the entire thread but I know that the biggest gains on our car would be in making the undercarriage completely flat and smooth.
|
THis is boarderline scary. Have fun with that dude. I thought i was crazy building my car into a half spin and turning left to go right/vice versa....
More balls than i got. Good luck! Crazy shit.... |
sorry to hear about Dandy FC. is there any video?
|
Originally Posted by NoPistons!
(Post 10179904)
THis is boarderline scary. Have fun with that dude. I thought i was crazy building my car into a half spin and turning left to go right/vice versa....
More balls than i got. Good luck! Crazy shit.... dandy is going to come back for sure. they have to. i dont think there are any videos of it. |
Any updates on the car/project?
|
Originally Posted by adensity
(Post 10749866)
Any updates on the car/project?
|
Not to be a Dick but you could just buy a litre bike and do some minor mods n hit 200 on the road for a lot less cash
|
All times are GMT -5. The time now is 09:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands