Engine Codes Run Help

Reply Subscribe

Thread Tools

Search this Thread

Apr 29, 2003 | 05:10 PM

Wufei

Thread Starter

Full Member

Joined: Mar 2003

Posts: 53

Likes: 0

From: Vancouver Island, BC, Canada

Engine Codes Run Help

I just ran the engine codes and I got a 13 and a 17. Apparently the 13 is the Intake Manifold Pressure System and the book says its a broken wire or short circuit. The 17 is the Feedback System for the O2 sensor.

So I'm guessin for the 13 code I just need to put in a new wire. But what about the 17 should I replace the O2 Sensor or is it something else thats wrong?

Thanx for the help

Ian

Apr 29, 2003 | 05:39 PM

Wufei

Thread Starter

Full Member

Joined: Mar 2003

Posts: 53

Likes: 0

From: Vancouver Island, BC, Canada

I can't for the life of me find my O2 sensor I have RB headers. Where is it located. Please Help.

Apr 29, 2003 | 06:28 PM

Wufei

Thread Starter

Full Member

Joined: Mar 2003

Posts: 53

Likes: 0

From: Vancouver Island, BC, Canada

Nobody loves me ^Bump^

Apr 29, 2003 | 07:24 PM

Makenzie71

...94% correct.

Joined: Oct 2002

Posts: 1,283

Likes: 2

From: High Texas

it;s because you're short...

anyways...the O2 sensor bung should not be that far from the exhaust ports. The bung should be on the runner from the rear rotor. If your O2 sensor is not there then that would certainly account for the code.