engine codes...
engine codes...
am i reading this right. it did 4 series, a 12, 17, 27, and 37.
http://1300cc.com/howto/how2/codes.html
12 Throttle sensor (full range) broken wire, short circuit throttle valve opening angle signal fixed at 20%
17 feedback system oxygen sensor output remains 0.55v 10 sec. after F/B system operation beginning feedback system canceled(for EGI)
27 metering oil pump (MOP) malfunctioning MOP, step motors, broken wire, short circuit, or malfunctioning ECU Mop fixed smallest open,basic fuel amount and timing fixed
37 metering oil pump (MOP) malfunctioning MOP, step motors, broken wire, short circuit, or malfunctioning ECU basic fuel amount and timing fixed
ok guys where do i start? i already bought a tps from ebay and put
it on, these are the readings with it on. what should i do 1st? is this a possible do it yourself job? thanks
http://1300cc.com/howto/how2/codes.html
12 Throttle sensor (full range) broken wire, short circuit throttle valve opening angle signal fixed at 20%
17 feedback system oxygen sensor output remains 0.55v 10 sec. after F/B system operation beginning feedback system canceled(for EGI)
27 metering oil pump (MOP) malfunctioning MOP, step motors, broken wire, short circuit, or malfunctioning ECU Mop fixed smallest open,basic fuel amount and timing fixed
37 metering oil pump (MOP) malfunctioning MOP, step motors, broken wire, short circuit, or malfunctioning ECU basic fuel amount and timing fixed
ok guys where do i start? i already bought a tps from ebay and put
it on, these are the readings with it on. what should i do 1st? is this a possible do it yourself job? thanks
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Wicked93gs
Other Engine Conversions - non V-8
0
Aug 23, 2015 10:14 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM



