egt install tomm and i need to know???
 

i just got my downpipe and i am goign to install it tomm .I have a exhuats temp gauge and I was wondering if you are suppose to install the pyro meter into the downpipe or the turbo maifold??? I hear down pipe from alot of people but i also heard turbo manifold. Directions also say to hook up the turbo mainifold. please help me decide. thanx

If you're running a Zenki FC turbo, put it in the turbo exhaust manifold.&nbsp You'll get quicker response and a more accurate reading off the probe installed there.

With a Kouki FC turbo, the turbo exhuast manifold is divided, so you can only take readings off one side, unless you buy another EGT.&nbsp It's "safer" to install the EGT probe in the downpipe, unless you're going to run two EGT (probes)...



-Ted

it's also alot easier to install into the down pipe... get the probe installed into the pipe before you install it. you need another hole with a nut welded on.

how many degrees will the reading be off if its installed on the downpipe as close as possible to the turbine?

Yea, I was wondering about this as well because I am ordering my egt gauge today more than likely and will be doing a little tuning myself using it.

On average 20&#176C - 40&#176 or about 100&#176F...



-Ted

So what wording should I use to tell Maztech where to install the probe? "In the turbo manifold"? Or what? Thanks.

see other thread


-Ted