RX7Club.com - Mazda RX7 Forum - Eccentric Shaft Pulley

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - Eccentric Shaft Pulley (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/eccentric-shaft-pulley-910498/)

nyvan

06-26-10 06:59 PM

Eccentric Shaft Pulley

Is it safe for me to remove the eccentric shaft pulley? Its real rusted so I wanted to take it off to clean it up.

Just wondering if it will throw anything off, and also removed the 4 little bolts but the thing seem tight on. Didnt want to force anything until I get some confirmation. Thanks

TwEaK

06-26-10 07:03 PM

yes you can remove the pulley DO NOT REMOVE THE 19mm bolt in the center to remove the maint pulley but all other pulleys can be removed with no problem..

TwEaK

RotaryRocket88

06-26-10 07:07 PM

They pulleys will only go back on one way, so you can't re-install it incorrectly. The 4 holes are not symmetrical, so it only goes on one way.

nyvan

06-26-10 09:12 PM

thanks so much guys.

thejallenator

06-26-10 09:49 PM

word of advice would be put a line of some sort on them so you know the way they line up. it makes it a tad easier when puttin it back together

jjwalker

06-26-10 10:46 PM

Quote:

Originally Posted by thejallenator (Post 10079512)

word of advice would be put a line of some sort on them so you know the way they line up. it makes it a tad easier when puttin it back together

Yeah, put a little white dot on the top of each pulley as you pull them off. It makes it much faster putting them back on.

All times are GMT -5. The time now is 09:39 PM.