drivers side door lock help
can anyone let me know how to get my old driver's door lock out and replace it?
i already have the new one, and i got the pannle off and everything, but i just cant figure out how to GET TO THE LOCK :wallbash: i ran a search and i couldn't find anything specific, all i saw was people saying "run a search and talk to us later" (it doesn't help when everone is saying "search" and no one has actualy written anything) |
There is two nuts holding the whole assembly on. Remove them, 10MM I think, and the whole door handle assembly will come off after you remove a few plastic clips. The lock is held in place by a wire spring clip. Pop that off and the lock cyclinder comes right out.
|
yea, i cant get the the left bolt though...
|
take out the weather strips and roll the window down all the way.
|
I didn't have to take out any weather strips. Just lower the window and if you took out the door panel you should be able to get to the nut.
|
...
never mind i got it |
All times are GMT -5. The time now is 08:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands