RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Do pulleys often go bad on these cars? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/do-pulleys-often-go-bad-these-cars-920903/)

EnjoiPugs 09-05-10 10:31 AM

Do pulleys often go bad on these cars?
 
It seems my A/C pulley went out on me a few months ago. I replaced the belt and it was most definitely the pulley causing the sound. I own a convertible so I just took it off and I put the top down when it's hot. But, now it's making a similar noise, probably from one of the other pulleys. So I'm wondering is this common? And is there a place I can purchase new pulleys at a reasonable price? Or is there a good aftermarket set I should look for?

By the way it doesn't sound like belt squeal. I also tried the soap bar trick on the belts to see if it was a noisy belt, but it didn't stop the sound, I think the belts on the car are in good condition.

durtled 09-05-10 02:46 PM

might be an idler pully for ur p/s or something

dexter_5000 09-05-10 03:44 PM

most likely the bearings. i'm not sure who sells the replacement ones. for them.

RotaryRocket88 09-05-10 03:54 PM

Idler pulley bearings (you have 2 of them), can be purchased from auto parts stores like NAPA or Kragen. You can press them out/in from the pulleys with a hammer and something to pad the blows.

Rob XX 7 09-05-10 04:32 PM

the bearings are not alot of money from the dealer or mazdatrix and will save you some guess work as to what may or may not work

EnjoiPugs 09-05-10 09:43 PM

That is really awesome. I never knew that. Thank you for telling me.


All times are GMT -5. The time now is 10:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands