Custom delete Wiring
Ok so as the title says I'm making a "custom" wiring as in deleting all junk wires I don't need such as all the ac wires I know at least a couple of people have done this could any of you guys shine some light on what harnesses/plugs I need to chop off if u could give the harness code that could help also such as (F-51)- rec. fresh select motor ??? What ever that is lol
|
Before anyone ask it's a 87 fc TII
|
Originally Posted by 87nitefc
(Post 11816827)
Ok so as the title says I'm making a "custom" wiring as in deleting all junk wires I don't need such as all the ac wires I know at least a couple of people have done this could any of you guys shine some light on what harnesses/plugs I need to chop off if u could give the harness code that could help also such as (F-51)- rec. fresh select motor ??? What ever that is lol
|
"rec. fresh select motor" sounds like part of the HVAC system, specifically, the motor that toggles between fresh and recycled air.
Not knowing this points up a problem...you need a fairly good grasp of the harness before you can "weed out the crap" without problems. It's not hard if you approach it in sections but ultimately you'll need a good overview at least. |
Yeah I get u that's why if anyone could let me know what they cut I already have a fair understanding of the diagram I'm jus kinda lazy on searching wat every single harness is I already rewired my emission harness and well the front/engine harness is next to be fixed
|
are you talking about a "tucked harness"? if so do a search for that
|
Not tucked more as jus unnessary wire removal I'm leaving only the wires that the 7 needs to function all other wires are getting removed
|
Originally Posted by 87nitefc
(Post 11816959)
...I'm leaving only the wires that the 7 needs to function all other wires are getting removed
|
It's also worth noting that some of the wiring usually considered to be "junk/crap" can be easily repurposed to become "useful/integrated".
The AAS system for example, can be quite handy. Point being, just because you have no current use for some circuits (to be determined after you define "functional") doesn't mean you might not in the future. |
To function such as all luxury that the car comes with originally such as radio cigarette lighter glovebox light all those wires and if possible the plug code(you know like f-51) like this I could pinpoint on the fsm what it is exactly
I get u that is why I had already thought about that and was going to shorten those wires so when or if I need them I could jus crimp another wire to it but that's only on certain ones I had also thought about adding male & female connectors to the ends of the chopped wires so like that I can jus plug the missing connection back to how it was |
Originally Posted by clokker
(Post 11817223)
It's also worth noting that some of the wiring usually considered to be "junk/crap" can be easily repurposed to become "useful/integrated".
Point being, just because you have no current use for it, doesn't mean you might not in the future. |
Originally Posted by scathcart
(Post 11817372)
Makes me rethink my views on circumcision...
|
Originally Posted by 87nitefc
(Post 11817290)
To function such as all luxury that the car comes with originally such as radio cigarette lighter glovebox light all those wires and if possible the plug code(you know like f-51) like this I could pinpoint on the fsm what it is exactly
I get u that is why I had already thought about that and was going to shorten those wires so when or if I need them I could jus crimp another wire to it but that's only on certain ones I had also thought about adding male & female connectors to the ends of the chopped wires so like that I can jus plug the missing connection back to how it was I guess I'm just confused as to why youre removing wires in the first place if not for a shaved/tucked bay look. |
Well that's what I'm going for since the previous owner thought it was a good idea to extend some of the wires and cut harnesses and not cut the extra wire I'll post later what I have removed so far
|
What are you going for?
|
Nice and tucked so far I deleted some of the check connector by the ign coil then by the main fuse box I got rid of some plugs there I also rewired my injectors,knock sensor and tps In the bay I'm not sure but I believe it's not much to remove but when under the dash there's so many wires that had been already cut such as the cigarette lighter and radio and for some dumb reason the center dash panel it's harness was rewired and extended but not finished
|
They most likely had something else installed that they took out later. Or tried to install something and it didnt work so they had to patch it back together.
Was the engine swapped that all of these things are extended? I guess you just need to figure out what is "extra." |
Nope no swap in my opinion I believe he was jus playing with the harness too much
|
Wouldn't a painless kit be a better option?
|
Wats a painless kit
|
For a clean tucked look where should I run engine harness and front harness
|
Originally Posted by 87nitefc
(Post 11819636)
For a clean tucked look where should I run engine harness and front harness
as an aside you can have the conversation with the police about why you couldn't signal for the turn because googles stock price was down that day |
wtf wireless sounds like funn hahaha
|
Originally Posted by 87nitefc
(Post 11819636)
For a clean tucked look where should I run engine harness and front harness
|
Originally Posted by clokker
(Post 11819938)
I must say that my first thought upon reading this was that someone capable of doing the work wouldn't ask this question.
but just think once the car is all blueteethed, you can look at which position your recirc motor is on your phone |
All times are GMT -5. The time now is 02:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands