cusco camber plate install
Has anyone installed these? they are going on my 86. There are 3 peices to it. I know where the plate and the threaded nut part go but there is another metal piece that i dont konw where it goes.
http://ebay3.ipixmedia.com/abc/M28/_...fe49de/i-1.JPG its the bigger metal pieces on the top outside. are there any instructions online or has anone installed these? |
The center bearing rides on that other piece. The spring has a perch at the top of it which has a pivot bearing at the center. You need to place that spacer on the bottom side of the camber plate to allow the strut to rotate. (so you can turn)
It's also possible that you would eliminate that bearing with the kit because they use bearings at the top of the strut. If you have lowering springs you will not need a compressor to take the strut top off and you can take pics of what you find and I'll help you from there. I forget exactly how mine went together when I swapped out my old shit. |
All times are GMT -5. The time now is 05:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands