Couple of questions about S4 FC [pic]
Hey!
Could someone tell me what this is, and if it needs to be/where it should be connected? Can't find it in the haynes manual, and I'm currently installing Haltech. http://i199.photobucket.com/albums/a...9032008265.jpg And another question. If the vakuum isn't connected to the S4 Twin scroll turbo, will it be in the high rpm or low rpm position? |
Looks like the EGR
|
In other words, no need for it? I have removed the other EGR stuff and replaced with block off (visible in picture).
|
you can remove it, and cover the hole with a block off plate
|
Ninjaguydan Block-off plates work good. Pineappleracing.com.
|
you should circle which part you're referring to. You realize that hardline coming from the turbo is the oil line right? I can't tell from your picture if it's even connected to anything.
|
that nipple is suppose to go to a hardline but it doesnt look like you got the hardline so a block off plate should be good.
|
twin scroll starts in the low position,, or does your engine start at redline and work it's way down to idle?
|
Originally Posted by lastphaseofthis
(Post 7959823)
twin scroll starts in the low position,, or does your engine start at redline and work it's way down to idle?
It does actually. Have to change clutch every 2000 miles :wallbash: Anyone have a tip how to use the twin scroll system with Haltech? you should circle which part you're referring to. You realize that hardline coming from the turbo is the oil line right? I can't tell from your picture if it's even connected to anything. that nipple is suppose to go to a hardline but it doesnt look like you got the hardline so a block off plate should be good. And another thing: Anyone have a guide to a double trottle mod? -Jarbra |
All times are GMT -5. The time now is 02:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands