RX7Club.com - Mazda RX7 Forum - Connector near BAC

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - Connector near BAC (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/connector-near-bac-1079558/)

JonasT

03-03-15 11:05 AM

Connector near BAC

1 Attachment(s)

I am wondering what these two connectors underlined in pink does.
This is a harness out of a 1987 TII.
The two connectors sits near the BAC plug, and the black/red and white wires goes to the two pin furthest left in the FEM-02 connector.

Attachment 629453

JonasT

03-03-15 12:13 PM

1 Attachment(s)

I figured it out. Found a picture on the forum that explains it.

1 ECU to port air solenoid valve
7 split air

Attachment 629430

Still not 100% sure though as it seems the previous owner did some splicing here, and the two plugs was connected together...

j9fd3s

03-03-15 12:28 PM

they do share the same black/white power wire...

satch

03-03-15 12:29 PM

If the white wire is next to a Black/Yellow wire in the emission side of FEM-02 then it runs to the split air solenoid. The White wire should also mate with a Black/Blue wire at FEM-02.

All times are GMT -5. The time now is 10:15 AM.