Cold Idle Problem - No AWS
Hello guys. A little help please. :)
After a rebuild, my, stock FC3C S5 doesnt idle when cold. The situation: The car is cold: I turn the switch, The motor starts, vroummm, no 3000rpm, and almost instantly drops revs, and shuts down (dies). If I press a little the gas pedal, turn the ignition, the car starts, I "help" it idle around 1200rpm about 1-3 minutes, and then idles fine. WHEN WARM, the engine starts NORMAL, and idles NORMAL! At the road, the car pulls perfect. :) I think a AWS problem, cause before the rebuild I had the "3000rpm jump" and high idle till the motor gets warm. Now I dont have the AWS. :( And the motor shuts down when cold... :( I know its something little that breaks my b@lls, so plz, a little expert help? THANKS! :D |
Sounds normal to me. What did you expect from AWS removal?
|
Do you still have the thermo-wax with its fast idle cam & coolant circuit?
|
Eh... i didnt remove anything. SureShot I have the t wax but I need more info with the rest. :(
|
There is a cold start fast idle cam on the TB.
It is advanced by a thermo-wax device. A 3/8" coolant circuit heats the thermo-wax, which pushes back the fast idle cam after warm up. In the FSM "fuel & emissions" section page F1-36 shows the adjustment procedure. Click on the link in my sig & navigate to that PDF file. You may download & print what you need. |
I will check it out!
Thank you very much! |
All times are GMT -5. The time now is 01:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands