RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Clutch is shot (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/clutch-shot-165207/)

Rx7Nub 03-10-03 01:45 PM

Clutch is shot
 
ok, well, my clutch is shot, i went to drive car today, and i go to push clutch in, and nothing, no pressure at all, the only gear I can put it in, is 2nd, and thats a bitch, so what do you guys recomend for a new clutch, money is a problem... it's gotta be a decent clutch, that is cheap, please help
-Mark

jeremy 03-10-03 01:51 PM

a bought a clutchmasters for my na that was cheap and had the pressure plate, to bearing, and pilot bearing. i think it was like $150ish. it hasn't been that bad of a clutch.

slvr7 03-10-03 02:02 PM

I don't think you're looking at a clutch problem per se, but more likely a problem with the hydraulics. Check the clutch master cylinder, the line to the slave cylinder, and the slave for evidence of leaking fluid.

Curtis
'86 gxl autox'r

ra ra rotory 03-10-03 02:11 PM

yeah....if your 'clutch' was shot, it would still have pressure, unless the pp broke or something, im not sure. I think it most likely is a leak in hydrolics

Rx7Nub 03-10-03 02:11 PM

it may be something else, my immedieat reaction was just the clutch though, i will see if I can check the rest of it out...

13bpower 03-10-03 02:18 PM

I would have to agree with everyone else. It dosent sound like the clutch has "gone out". If that were the case you would still be able to get it in gear, but the clutch just wouldn't "grab" the flywheel.

Rx7Nub 03-10-03 02:19 PM

ahhh, ok, thanks alot :)

jeremy 03-10-03 02:25 PM

guess i should have read that more thoroughly huh.

dr0x 03-10-03 03:04 PM

If there is no fluid the slave is shot, if there is fluid but no pressure its the master cylinder.

Rx7Nub 03-11-03 09:48 AM

there is fluid, but no pressure, so how much is this going to cost me to fix??? coz right now im pretty broke..

Rx7Nub 03-11-03 04:54 PM

bump - anyone know?

ra ra rotory 03-11-03 05:26 PM

well according to drox, that measn the master is shot, which is alot cheaper than a clutch... put a new master on and bleed it and you should be fine. I think mazdatrix.com sells them, or one of those sites

ra ra rotory 03-11-03 05:30 PM

http://www.mazdatrix.com/f-hydral.htm

GlenL 03-11-03 06:18 PM

The same exact thing happened to me this weekend. I had to drive around clutchless until I could park it somewhere... and in Houston, that was a big PITA. I also need to replace a throwout bearing, so I'm going to get it done altogether now, along with a new Centerforce... although maybe I should've gotten an ACT now that I read more about the Centerforces.


All times are GMT -5. The time now is 09:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands