Clutch Replacement Issues
 

I removed the clutch on a 88 convertible. I noticed that the bolts attaching the pressure plate to the flywheel were not the same size. Two bolts were 14mm and the other four were 13mm and slightly shorter. Also, there were spacers on only three of the bolts.

Are these bolts supposed to be different? and how many spacers, if any are there supposed to be??

Also, approximately how long are those bolts supposed to be??

Thanks for any advise

Iván

they should be the same. Its a rotating object and should be balanced. Go to napa and get 4 bolts and washers that are the same. Take an old bolt so they can measure the thread pitch and you won't have to make two trips.