RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Bonez Superflo Cat Crumbled! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/bonez-superflo-cat-crumbled-582038/)

opelbits 09-27-06 03:50 PM

Bonez Superflo Cat Crumbled!
 
I've had a Bonez on my 87 n/a for about 3 or 4 years. My old cat (generic mufflershop cat) had the catalyst brick break up and plug the exhaust. So I replaced it with the Bonez, which I was very happy with.
Until now.
It just did the same after about 30-40k miles.
Not really complaining about the quality, but I expected the brick to last longer than that, especially in an n/a.

So, once again, I am cat-less, loud, and stinky. But it sure does go!

stevej88na 09-27-06 04:07 PM

One wonders if one's car is running a bad AFR? I hate to say it, but 30-40k doesn't sound bad to me!

My5ABaby 09-27-06 04:19 PM

How quickly would a cat die on a car running premix and with all the emissions removed?

:dunno:

R_PROWESS 09-27-06 04:40 PM


Originally Posted by My5ABaby
How quickly would a cat die on a car running premix and with all the emissions removed?

:dunno:


lol i wunder..

Digi7ech 09-27-06 05:10 PM


Originally Posted by My5ABaby
How quickly would a cat die on a car running premix and with all the emissions removed?

:dunno:

Forever, because it's sitting in your garage(ALL emissions removed...).

As for a cat without an airpump on a car... not long

staticguitar313 09-27-06 05:32 PM

yeah my bonez superflo cat is starting to go, a peice of brick has come out already, its ok though, i have a stock set for next month ^_^

opelbits 09-27-06 07:02 PM


Originally Posted by stevej88na
One wonders if one's car is running a bad AFR? I hate to say it, but 30-40k doesn't sound bad to me!

A rotary running rich? What a novel idea!



It is likely, though. The motor was replaced at 67k (142K now) and I don't think they checked out the FI system. Not long after I bought it, I found the oil metering pump had 1/4" freeplay instead of the FSM spec of 1mm. I went thru just about every item that could be measured for input or output just to make sure. Found a few things bad or out of spec and replaced them.
But I have never messed with the AFR.

RETed 09-28-06 05:51 AM

Are you still running the air pump?


-Ted

opelbits 09-28-06 12:15 PM

Yep, everything is intact.


All times are GMT -5. The time now is 07:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands