RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   blue injectors wtf? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/blue-injectors-wtf-553869/)

jeff_man 06-26-06 05:30 PM

blue injectors wtf?
 
Ok i pulled my injectors to see withch ones they are becasue i don't know the true year of my motor and they where light blue. not a faded purple but a real ligh blue with a 195000 number on them and not a 195500... any one have any clue wtf is going on. there side feed and thats all the info i have. bot the motor as a stock j spec swap.

RETed 06-27-06 12:28 AM

Sounds like 720's?
Primaries and secondaries?


-Ted

jeff_man 06-27-06 12:31 AM

someone else said that, only problem is i can't find any info on them being high or low. i have to rip them up and test them and still i was told side feeds don't fit on FCs stock so i have no clue whats going on

Ottoman 06-27-06 12:36 AM

Side feeds on an FC?? very strange..

sounds like u have custom rails.. which obviously means they're not oem injectors...

what ECU does the car run? got any pics?


80% chance they're low impedence...

just check behind the passenger headlight for a resistor box

jeff_man 06-27-06 01:50 AM

ok heres the story. gxl aspc with a jspc 13bt. the harness is fucked. the motor was sold as stock but it had a s5 turbo. and a slight port. i didn't know tell a few days ago when we started working on it. the ecu is a stock s4 n332. i don;t know if the rails are stock or not the dude that was working on it did say anything about it. i'm trying to go pick them up from him to have to ohes tested and take them to 2 other rotor shops to ask

Carzy Driver 06-27-06 02:30 AM

pics?

Ottoman 06-27-06 03:03 AM

if it's a stock ecu.. the car wouldn't run... it would drown in fuel if it has 4x720's..

it needs something like an Rtek 1.8 at least...

maybe the ecu is chipped.. but looks plain from outside...

RETed 06-27-06 03:11 AM

Impedence easy to verify...
Just measure resistance between the two pins.


-Ted

jeff_man 06-27-06 04:00 AM


Originally Posted by RETed
Impedence easy to verify...
Just measure resistance between the two pins.


-Ted


ya i just found that out today and have to go pick up the injectors from the friends house but have no car to do it =/


All times are GMT -5. The time now is 03:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands