best turbo for the job?
I know I have been asking alot of questions lately, but I need to, so thanks for putting up with it. I did try to search for this, but after looking thru a few pages, I saw nothing I was looking for.
I am having a motor built by BDC, and it will be having a large streetport. I also have an E6k, 255lph fuel pump. I dont have injectors, which meanss I will just upgrade them. I have the RB DP and MP, and I will buy an Apexi N1 (possibly upgrade the DP and MP to 3"). I will also buy an intercooler kit. I dont have a turbo either. My problem is deciding the best turbo for this motor. I saw a T04E kit, but I was told it isnt a good turbo for some reason. I would like to get a little over 300hp at the wheels. So can someone tell me a good turbo and manifold I should get that will spool up at somewhat early? Thanks. |
if you only shooting for 300 @the wheels a BNR stage 2 turbo can do it for ya
|
well, 300 on lower boost, I would like to get like 375 or so, when turning up the boost. Sorry for not being specific.
|
I guess also a suggestion of what type of intercooler as well to handle the power.
|
What's your budget for what you have left to do on the car?
|
A T04E would do the job easily. I don't know what you heard about it being a bad turbo, it has worked fine for countless people that I know. But if you are shooting for numbers like that then a BNR stage 3 or 4 would be fine. Plus with those turbos then you could use the stock manifold. Just a thought.
Zach |
Oh, and about an IC. Tons of people go with either the GReddy FMIC kit or build a FMIC setup using an NPR core from an Isuzu turbo diesel. I'm just not a big fan of FMIC's so I'm probably not the best person to ask. Sorry.
|
Originally Posted by BoostedRex
Oh, and about an IC. Tons of people go with either the GReddy FMIC kit or build a FMIC setup using an NPR core from an Isuzu turbo diesel. I'm just not a big fan of FMIC's so I'm probably not the best person to ask. Sorry.
But the Greddy kit can be available at http://www.rx7store.com, its usually the norm since it can easily support big horsepower numbers. As for turbo listen to anyone above, http://www.rx7store.com has references to the BNR upgrades. Check em out! :cool: |
Originally Posted by Infini IV
What's your budget for what you have left to do on the car?
|
I hope this works....a compressor map for that turbo I saw for sale...Good or NO?
http://www.rbracing-rsr.com/turbo/TurboMaps/t04e-50.gif |
a hybrid should spool quicker than most other turbos but the stage 4 hybrid is a bit laggy, you will compromise quick spooling for higher HP numbers so keep that in mind when looking for a turbo, basically you can't have it all but you can have a happy median.
|
so a t04b with a .60 and .96 compressor side? That seems to be what most use.
|
Originally Posted by EvilWankel
I hope this works....a compressor map for that turbo I saw for sale...Good or NO?
|
Originally Posted by EvilWankel
I hope this works....a compressor map for that turbo I saw for sale...Good or NO?
http://fc3spro.com/TECH/TURBO/compmap.html Why don't you ask BDC about what turbo to run? -Ted |
he said BorgWarner T04b part #(something, heres a guess)02343
|
You could get closer to 400rwhp on pump gas with something like a 60-1, .96 hotside or larger...spool up isn't bad at all, either, especially with the ball bearing option.
|
"BNR stage 3 or 4 would be fine"
i looked at their site and i can't find stage 4 anymore...did they stock offering this upgrade? |
Originally Posted by Jager
Not a fan of FMIC's?
But the Greddy kit can be available at http://www.rx7store.com, its usually the norm since it can easily support big horsepower numbers. As for turbo listen to anyone above, http://www.rx7store.com has references to the BNR upgrades. Check em out! :cool: Zach |
All times are GMT -5. The time now is 11:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands