Arghh Any Ideas?
 

Turning signals don't work...
yet everything seems to be good, at least to my knowledge. fuse is fine. wires are all fine. can't be a short cause my hazzards work fine inside and outside of the car. what am i missing?

What year and model?

I had a similar problem with electrical gremlins (my left turn signal) that turned out to be a bad alternator. If you have a spare lying around, try throwing it on and seeing if that helps?

Watch your idiot lights for the next little while, if you see multiple lights flashing in miscellaneous patterns that is a definate indication of a bad alternator.

-Good Luck!

do the hazard lights work>?

Turn signals are tied together with the Hazards.

if the hazards don't work as well, chances are that either the bulbs are bad, fuse is blown, or the CPU flasher board is bad.

I have rebuilt replacement CPU flasher boards on my webstore if you need one.

no hazards lights work fine.

86 gxl and 89 t2 combined.
alt is fine as well.
still stumped

Borrow a different signal switch and swap it on for testing.

Randomness: My best friend's name is Christina. She doesn't own an RX-7, though.

:wtf1: I don't get it. I agree though, another switch would be good to use as a test.

aarons best friends name is christina, along with the name of the creator of the thread.

beat me to it lol

he *did* say it was random...

haha it would take to long to get a different switch just to use as a test though...

does she go by stina for short?

Gotcha, sorry.

Local wrecking yards should have a bunch. Usually very cheap as well, especially if you pull it yourself. Or find another local owner.

Nope...At least, not by anyone else but her young nephew. My nickname for her is not forum safe. ;)

ha im sure its not forum safe. no junk yards close to me with decent parts left. or even with any parts.