RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Am i leaning out? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/am-i-leaning-out-77643/)

Gen2 05-07-02 10:20 AM

Am i leaning out?
 
I recently purchased stock 87 turbo2, with a filter and no bolts on the DP(open DP) and the last owner may have gutted out the cat..anyway, 1st time driving on the freeway last night in 4th gear my boost shot up considerabily higher than 1-3 gears, accroding to the stock boost gauge.

so with the current "mods" the car has now should i be careful about leaning? also what PSI is it when a FCD becomes a must?

thanks~!

13B2QuIcKNy 05-07-02 10:41 AM

get an air/fuel gauge or an apex s-air fuel controller , if ur car is leaning out... since u have a few mods... even tho i dont think it would be ... but one good run with more air than fuel can destroy the engine ,, believe me.. it happened to my neighboor...

SaabGuy 05-07-02 10:56 AM

Port your w/g. Are you hitting fuel cut?

UniqueTII 05-07-02 11:12 AM

What do you mean open downpipe? If the dp isn't connected to anything, why would it matter if the cats are gutted? I may have misunderstood what you meant.

NZConvertible 05-07-02 04:57 PM

Re: Am i leaning out?
 

Originally posted by Gen2
1st time driving on the freeway last night in 4th gear my boost shot up considerabily higher than 1-3 gears, accroding to the stock boost gauge.
so with the current "mods" the car has now should i be careful about leaning? also what PSI is it when a FCD becomes a must?

Fuel cut is at 8.6psi or 445mmHg, which is off the stock gauge's scale. Get an aftermarket guage ASAP.


All times are GMT -5. The time now is 06:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands