ALRIGHT!! post all single turbo setup pics NOW!!:)
i recently bought an HKS SS replica turbo manifold for my 91 13bt engine and i am wanting to put a turbo but do not nknow which to go to ... maybe ebay turbo?? im not sure well iwould love to see your single turbo setup and maybe throw some info back my way with the pic i would love to learn more about the turbo rotary. i know alot about the non-turbo rotary seeing that i have had one forever but i need to know what kind of abuse these 13bt's can handle. i have a j-spec 16k miles factory rebuilt engine ... so its still a bit young;)
thanks jack |
Uh. It may be just me but didnt the fc come with five wheels, two rotors and a SINGLE torbu from the factory?
|
I think he means upgraded singles.
|
Here's an old one of mine in the vert before it was finnished. To lazy to upload new pics...
Finished pics and mods list can be seen under my garage area https://www.rx7club.com/attachment.p...chmentid=64709 |
nice man!
|
the bling factor is outta control in that hizzy
|
|
What is the purpose of that sensor in the fuel rail? And, are those 100% OEM side mirrors? BTW - I love your car, it's on my desktop wallpaper :D |
Originally Posted by RX-Heven
Here's an old one of mine in the vert before it was finnished. To lazy to upload new pics...
Finished pics and mods list can be seen under my garage area https://www.rx7club.com/attachment.p...chmentid=64709 How did you finished\mate the SS braided lines into the stock hard fuel lines? or did you ran SS braided hose all the way to the tank? |
Originally Posted by KNONFS
What is the purpose of that sensor in the fuel rail?
And, are those 100% OEM side mirrors? BTW - I love your car, it's on my desktop wallpaper :D Yes, i have stock european mirrors, electric ones, foldable (same like JDM). Manual ones looks identical. Sensor in fuel rail is for my fuel pressure gauge. |
Originally Posted by RX-Heven
Here's an old one of mine in the vert before it was finnished. To lazy to upload new pics...
Finished pics and mods list can be seen under my garage area https://www.rx7club.com/attachment.p...chmentid=64709 |
My Turbo
|
Originally Posted by KNONFS
:drool:
How did you finished\mate the SS braided lines into the stock hard fuel lines? or did you ran SS braided hose all the way to the tank? You cut the end off the had line, slip over a fitting and then reflare the hardline. The i.d. of the hardline is just about the same as -6an so why waste the ss line money. -6 is plenty for my application. You can just use hose clamps if you want.... |
revision 1 (stock turbo)
http://www.countercultured.net/pics/...8/IMG_2165.jpg revision 2 (wolf3d + to4b) http://www.countercultured.net/pics/...4/IMG_0022.jpg .. what happenned to defective to4b http://www.countercultured.net/pics/...w/IMG_0006.JPG revision 3 (gt40) http://www.countercultured.net/pics/...4/IMG_0037.JPG motor had a pinched apex seal due to a poor rebuild from whoever had the car before me. was only a matter of time. http://www.countercultured.net/pics/...r/119_1944.JPG revision 4 (As it is today, stock 90 block, gt40) http://www.countercultured.net/pics/...4/IMG_0001.JPG |
heres a shot of my car at 7stock, courtesy of Super Street
http://superstreetonline.com/eventco...stock_45_z.jpg |
Originally Posted by RX-Heven
I used an -an hard line adapter.
You cut the end off the had line, slip over a fitting and then reflare the hardline. The i.d. of the hardline is just about the same as -6an so why waste the ss line money. -6 is plenty for my application. You can just use hose clamps if you want.... I will be doing this very soon :D I am scare about fuel leak on all fittings, I mean the SS oil cooler lines leak :( |
Originally Posted by cymfc3s
heres a shot of my car at 7stock, courtesy of Super Street
http://superstreetonline.com/eventco...stock_45_z.jpg |
|
All times are GMT -5. The time now is 03:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands