Air Intake Problems
 

I Have An 86 Rx-7 Na And I Was Searching For A Thread That Explains A Self Install For The Intake. I Tried Doing It Myself But I Found A Small Complication...the Vacuum Line That Connects To The Air Pump Needs To Be Caped Off Or It Needs A Breather...the Problem Is I Don't Know Where To Find One...can Someone Please Help Me Out?

check autozone, shucks, checkers, or kregen (sp?) for the breather

For now get a green scotchbrite pad and wrap it with a big rubber band or tie-wrap around the air pump intake (or what you're calling the "vac line")...

Get a dedicated air pump filter assy as soon as possible...They're only 10 bucks or so...

thanx guys but what does the assembly consist of? and where do i get it?

You see this?



http://www.simota.com.au/HTML/Final%...20breather.jpg



Go buy this. It's cheap. It'll be labelled 'air breather' or something similar. It'll fit in your hand. It'll fit that hose from the pump perfectly. :)

Yeah i know exactly what that is but i was told that the breather was too small for the tube that i am trying to cover... I will take your word for it though...Thanx

i got the breather....just gotta wait till tomorrow to see if it fits correctly...thanx everyone for the help...i appreciate it....

it should work fine :)

Yeah, the breather works find on it. You may need to get another hose clamp, the one that came with my autozone breather was too small for the hose.

Yah my airpump breather filter makes a funny spooling up noise. It gets anoying.(No its not the turbo)

Gxls dont have that do they or i cant seem to find where i put that =\ ?

all of them have it.
when you install a cone filter you need to filter the air going in the airpump too

I don't have a better pic of how mine used to be, so hopefully this helps until someone posts something better... :)



https://www.rx7club.com/attachment.p...id=73885&stc=1

Nah, scotchbrite pad on the airpump :D.

i got an apexi cone and the adapter that goes onto the cone has a hole on it and they give u another hose to hook up to the hole and the airpump.