87 T2 Project
Well i got a 1987 turbo 2 about a month ago. i paid $1400 for it with 168k on the clock. it has 90psi on both rotors. the car ran fine but the paint is pealing. and there are a couple of exterior dents. the interior is in ok shape but is really dirty. the usual stuff is broken(triangle vents and radio surroind).
When i drove the car it boosted fine and pulled much better than my N/A. but it started to hesitate around 5k-6k. i wasnt sure what the problem was. so i took off the UIM and got to the secondary injectors and pulled them off as well as the primary injectors and sent them to get cleaned. but one of them is leaking. so that might have been causeing the problem but not sure yet becuase its all apart. Well since this car isnt a daily driver yet i decided to take off the LIM and Turbo. when i did this i cleaned the UIM LIM TB and TB elbow. i did the TB mod at this time also. i painted these all with a dark silver color(pics below). with the turbo off i am in the process of porting the wastegate. while i have the turbo off i looked at the exhaust manifold and found that it was cracked pretty bad. so i bought a used one for $50 from a guy on the forum. i also cleaned the turbo. i took off the compressor housing and cleaned it with some carb cleaned to shine it up all nice. with the turbo all apart i tried to spin the wheel and it was very hard to move. i wasnt sure what it was, because while the housing where around the wheel it moved freely. so i took the turbo wheel apart and it was loaded with carbon. so im going to clean all that stuff out. but while i have this all apart should i rebuild the turbo? the car has 168k on it but not sure about the turbo, because a bolt on the manifold was a different size from the rest. so i think someone has messed with it before. pics coming |
Interior pic
http://www.imagestation.com/picture/...3/f99c2b84.jpg Pics of the carbon in the turbo http://www.imagestation.com/picture/...b/f99c0b39.jpg http://www.imagestation.com/picture/...2/f99c0b3c.jpg http://www.imagestation.com/picture/...d/f99c0b40.jpg http://www.imagestation.com/picture/...5.jpg.orig.jpg |
Wastegate pics
http://www.imagestation.com/picture/...b/f99c0d85.jpg http://www.imagestation.com/picture/...7/f99c0d48.jpg http://www.imagestation.com/picture/...e/f99c0d3b.jpg Alex(pervuianrx7) helping me the electric dremel sucks!!Me porting http://www.imagestation.com/picture/...6/f99c0d2f.jpg http://www.imagestation.com/picture/...f/f99c0b63.jpg http://www.imagestation.com/picture/...2/f99c0d79.jpg http://www.imagestation.com/picture/...7/f99c0d6a.jpg |
TRU BALLER'S thats me on the gray shorts and hobo sweater. Gainesville, florida REPRESENT!!
|
Painted manifolds 500f paint
http://www.imagestation.com/picture/...a/f99c0d4e.jpg http://www.imagestation.com/picture/...4/f99c0d5c.jpg Dirty Turbo http://www.imagestation.com/picture/...5/f99c0d96.jpg http://www.imagestation.com/picture/...0/f99c0d65.jpg Clean turbo http://www.imagestation.com/picture/...7/f99c0b4c.jpg |
|
Dirty Engine
http://www.imagestation.com/picture/...2/f99c0d40.jpg http://www.imagestation.com/picture/...4/f99c0da1.jpg Gettign cleaned http://www.imagestation.com/picture/...4/f99c0b35.jpg http://www.imagestation.com/picture/...c/f99c0b32.jpg And to think under the hood looked like this http://www.imagestation.com/picture/...7/f99c0dae.jpg thats all the pics for now. now me and pervuianrx7 are in the process of removing a/c which is a b!tch when your rad, and oil are bent. |
and they say DSM's are dirty and in the garage too much...
|
well rebuilding the turbo isn't as difficult as some may think just make sure that you do it patiently and pay attention to detail and you can rebuild your turbo without too much difficulty!
|
bumpeeeeeaaahh!!!
|
well i took part of the A/c off today along with some cleaning of the front cover.
the damn damn a/c is a b!tch to take off when you car has a bent rad and oil cooler http://www.imagestation.com/picture/...5/f999af28.jpg damn grease that clunks up is so hard to get off. anything i should use to get it off other than engine degreaser? http://www.imagestation.com/picture/...d/f999af2c.jpg A/C is gone http://www.imagestation.com/picture/...3/f999af2d.jpg http://www.imagestation.com/picture/...9/f999af30.jpg |
"DoNt HaTe ApPrEcIaTe"
|
Originally posted by Peruvianrx7 "DoNt HaTe ApPrEcIaTe" |
Please guys dont be asses we just want some opinions, even negative feedback. THANX!
|
looks good
|
to get stuborn grease off try brake parts cleaner. or the degreaser in a jug...but be carefull with the jug stuff it likes to eat aluminum.
ej |
alright cool ill try some brake cleaner tommorow. will carb cleaner eat it up? i just wanan get it all clean while i can.
also i ordered a RB downpipe, safc, 720cc injectors on monday. and the injectors are here. yay!!! i even got them tested to make sure they work as 720cc and they do. today i also cleaned the carbon off of the turbo. im letting the turbo parts soak in carb cleaner. dont work, not the whole turbo, just the front wheel, and the 2 cup like things by the exhaust wheel. none of these have seals on them so i assumed the would be ok. more feedback please you guys! i know its not much right now but its getting there. |
damn forum double post
|
well today i went to the shop again to work some more on this. i took out the turbo pieces and they looked much better. the carbon is coming off. i also went ahead and cleaned out more of the engine bay. i took off the alternator and water pump housign along with the thermostat. i painted a bunch of parts while i was at it. i painted my K2rd block off plates red, with 500f paint. i also painted the waterpump housing red. i repainted the thermostat and the rest of the water pump stuff silver. i painted the wastegate acturator black.
http://www.imagestation.com/picture/...0/f99296d1.jpg before pics of the water pump and thermostat http://www.imagestation.com/picture/...3/f99296d5.jpg BLock off plates http://www.imagestation.com/picture/...e/f99296d7.jpg engine bay gettign cleaner http://www.imagestation.com/picture/...a/f99296da.jpg so guys what do you think of this stuff? |
Looks sweet! I think the red will look awesome under the hood. Have you got the racing beat dp yet im thinking about getting one when i get my TII, do you think the build quality is nice. Thanks!
|
nope the RB downpipe hasnt come in yet. but when it comes ill post pics. but yea i like the paint i did alot but the water pump need a couple more coats. when you look at it close you can see a little bit of black.
|
talk about rice :p: man...when u gonna get those blue neons from pep boys??? APC IS DA SHIZZLE BIZZLE! Dont hate on my sleeper, just cos i aint got that nawssssssssssssssss!
|
I'm doing close to the same thing on my N/a since the engine blow. looks nice
Mage |
well the last couple of days ive been painting parts. today i put some of them on to see how it looks.
http://www.imagestation.com/picture/...f/f98e547c.jpg http://www.imagestation.com/picture/...e/f98e547d.jpg http://www.imagestation.com/picture/...9/f98e5480.jpg so what do you guys think of it so far? also today i was trying to put my turbo back together, and i noticed that the exhaust wheel hit the housign when it turns now. so it spins like sh!t now. is this because one of the fins got bent? i dont know whats going on. |
well hey guys i am still tring to put the stuff back together. but i need to replace the 2 hoses that go on to the turbo to the intercooler. do you guys now where i can buy these? there is one strait piece and then the other is like 3or 4 inches then has a 90 degree bend. the ones that i had, had cracks in them.
|
All times are GMT -5. The time now is 02:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands