RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   1990 Gxl (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/1990-gxl-288079/)

M2Launch 03-28-04 04:29 PM

1990 Gxl
 
So i found a Second Gen Gxl with 83000 for $3000

i think im gonna go with it ... everything works

only thing that concerns me .. is the idle on the rpms it starts up high but after u drive it a bit the drop down to 500 ish ..... is that bad .. the guy said somthing about an adjusting idle ... have you ever heard of that ?

heres some pics taken with my phone so not the best quality.....

M2Launch 03-28-04 04:42 PM

picture

n4ji 03-28-04 04:45 PM

Re: 1990 Gxl
 

Originally posted by M2Launch
So i found a Second Gen Gxl with 83000 for $3000

i think im gonna go with it ... everything works

only thing that concerns me .. is the idle on the rpms it starts up high but after u drive it a bit the drop down to 500 ish ..... is that bad ..

Score, looks like a nice S5. As for the idle, as the car gets warmer it's natural that the idle would drop. As for it idleing at 500.. that's almost a little low for my likings. The 13B should idle around 750 RPMS at full operating temperature.

SonicRaT 03-28-04 04:47 PM

It should start up and idle around 3000rpm, then eventually it'll drop to around 750-800. Looks to be a S5 (89-91). Definatly nice :)

jon88se 03-28-04 04:54 PM

it shouldn't idle @ 3K for more than a few seconds then gradually move down to 2K, 1500K then 750

M2Launch 03-28-04 06:54 PM

When i started it it was at 3000 then went to around 2000 - 2500
it drove very nice .. but after i took it on the freeway it was at around 500ish maybe between 500 and 600 ill look at it really close next time ... in really good shape guy even said he'd throw in some aftermarket wheels he got for it :D

Zer0 Cylinder 03-28-04 07:21 PM

thats the cold start assist.

vrooom305 03-28-04 09:10 PM

I never get those deals...:(

nice car though :bigthumb:

YakATK 03-28-04 09:21 PM

Nice car, definatly a good score.

The idle is totally normal, 500 may be a bit low but you could always just adjust it to be slightly higher once warm. Definatly a nice looking S5, and black is so sexy of course. :D

later
-Justin

Psygnosis7 03-28-04 09:26 PM

Not a bad deal, I ended up paying $4,600 for my 90 GTU with 97k miles. A little much, but it has a fresh motor in it that supposedly cost 4,500 to have installed. Where, when, or how many miles were on the car it was put in I have no clue though. All I can really tell is that it's hella clean and there's an Atkins rotary sticker on the air box.

jon88se 03-28-04 09:32 PM

500 is low for an idle and probably not a comfy idle either...in my experience, a slight bump from factory specs makes a more consistent and smooth idle (hey, these are old cars - compression etc...will NOT be perfect). 850-900 is where I like it :) I also have an underdrive pulley so this helps with voltage drop at night.

M2Launch 03-28-04 10:44 PM

well it was pretty steady at just above 500 rpm but next time i drive it ... ill look at it for sure..... get a direct reading

Mines RX7 03-29-04 12:27 AM

I would buy it for sure!! I'm biased though, cause I own the exact same car. Black 1990 GXL. (It was like a beige color when I bought it, then I had it painted black.) I've loved it ever since I've had it. Got it about five years ago for a lot more than $3000, oh well. Snatch it up while you can!

M2Launch 03-29-04 02:24 AM

Oh ... Trust me i already gave the guy some money to hold it ... im just waiting for my loan to go through on it ... im really excited bout it ... only thing i have to do tho... its got some UGLY ass Decals on it ... im definatly gonna have to get rid of those ... other than that ... its going to be very sexi ... hopefully ill have her by the end of this week any guys here in the northern utah area?

bingoboy 03-29-04 05:34 AM

buy it.

M2Launch 03-29-04 09:03 PM

got the loan put in... just waitin on the word ... im soooo pumped.... i cant wait ... Any peeps on here from utah?

koukifc3s 03-29-04 09:40 PM

congrats! :)


All times are GMT -5. The time now is 09:57 PM.


© 2024 MH Sub I, LLC dba Internet Brands