13b rew swap?
 

hey guys, 2nd gens arent in my knoledge of easy motor swaps. i got a freind that pcked one up for 50 bucks, and i have a spare 13b rew shortblock laying around outa my old car. as well as the tranny and manifolds and stuff. what all would need to be done to make this work in his second gen. im sure that its been coverd before but searching for 13b rew swap pulls up to many resaults. thanks for the help guys

Why not look in the FAQ stickies?


-Ted

lol because i am not quite sure what you mean by faq stickies. lol sorry for being a retard but ive got a migrain and am trying to peace together a comprehensive parts list of what ill need so i can give him a general estamate on the cost

that link helped alot, thanks

i guess in your case it'll cheap as hell..........considering you already have the motor and everything needed to do the swap.........you gonna ditch the twins right?

prolly a small turbo, thinking t4. get him up to 400bhp, and simplify this piss outa the motor without having to upgrade the 550 and 850's no emmisions or anything like that power steering and alternator is pretty much it.

keep us posted.................

my biggest thing im gona have problems with is because im going single im pretty sure id have to put an aftermarket ecu in their for him, and of course all the wirring ill probably try and do myself, save him some money should be a lot less to tackle with no emmisions and twin crap, anyone thats wired one up before, some helpfull tips would be nice,

An aftermarket ECU is mandatory anyways.

i don't know anything technical besides basics when it comes to the 3rd gen.........search the 3rd gen section for the electrical how-to's......... download the FD and FC FACTORY SERVICE MANUALS (FSM) and start putting stuff together little by little.

Hope you can read wiring diagrams and follow instructions carefully.........I was able to do my Swap like that and I didn't think it was TOO difficult....I wish I hadn't rushed things so if anything take THIS as my only advice:

take your time.....do things right the first time or you will pay for it later.





https://www.rx7club.com/showpost.php...18&postcount=8
and go find the 3rd gen manuals..........

good luck.

your not going to get 400bhp out of the stock injectors the FD's are rated to 330bhp at 80% duty cycle
http://rx7.com/cgi-local/3rdgencalc.cgi

check the ARCHIVES for those who have ACTUALLY DONE the swap and wrote HOW-TOs

yea i have the 3rd gen wiring manual, and if the chart is acurate then 850 and 1300 should be more then enough. ive seen people hit 350 on stock fuel system, but ill fuss with that when the time comes worry about getting it bolted in first

sweet.....take a buttload of pics........

i read about putting in a different crossmember. i wonder if i could just lop off the crossmember from my fd subframe that i already cut up because the car was in a bad wreck and that side had a bolt strip on me and round off. take that center section and weld it in between the second gen rails

i am doing the same swap. there is a write up on fc3s.org. i wish i could give you a better direct link. shoot me a pm. i am getting my 13b rew rebuild right now then i'm tossing it in. i have some links for you.

ah hah. got them for you
http://fc3spro.com/TECH/SWAP/FD3S/rew.html
^ the swap requirements

http://00ef783.netsolhost.com/produc...9e0c27965329c0
^^ the relocation brackets for engine mount

thanks for the pm, do these mounts solve the severe angle issue i keep hearing about? i know very little about second gens as you all might have gatherd ive owned an fd for about a lttle over a year now so i know a decent amount about those (still learning tonz tho) lol but i figured this would be a good learning project and would help my freind get his shit on the road with a newer motor. who can complain with a straight body second gen for 50 bucks