|
What parts do you dream of for your fc
just like if says
it can be hard to find parts, jdm parts, parts that don't exist yet. Let's here em |
1.a reasonably priced create 4rotor
2. ahhh shit i couldnt care less about everything else if a could have that |
Carbon fiber hard top for the 'vert :D
And I'd settle for a reasonably priced 3 rotor crate motor. Also, an intercooler that will work with my Paxton blower. Even top mount, I already have a TII hood. |
ohhhh yes, i wish i could have a CF top for my vert too. but i dream about having a 100% perfectly painted chassis with a vip/ wide body kit on. throw in some deep dishys and im drooling.
|
ha
reasonably priced anything really for my FC but i have alot of stuff i want like a 20B a lamborgini blue paint job a whole new gray and black interior with no rusty floor panels tein coilovers a body kit that looks good because i cant find one that fits the lines of the FC and some work miester or rays engineering wheels with the perfect offset |
A badass rearend rebuild kit.:wallbash:
a 20b under 4k:icon_tup: |
the thing i would love the most is not too big... a sweet HKS T51r complete kit !!
but if its "anything goes" then a nicely done 20B setup exactly like the MPSYS FC. http://videos.streetfire.net/video/M...bo-w_39698.htm http://videos.streetfire.net/video/M...bo-w_39697.htm |
A complete NA - Turbo conversion kit
20B crate motor complete, longblock, ECU, Harness, Ignition, turbo, intercooler for a reasonable amount - not a used JDM needing a rebuild. Cheap Rebuild kits that aren't junk Ramses666 |
a rotary engine that always starts and runs perfectly.
ha....ya thatll be the day |
a fc to fd interior conversion or at least access to as big of a selection of aftermarket parts
|
No rust. Anywhere. Ever. :wallbash:
Street ported 20B GT35R Haltech 17" Enkei RP03 |
An FD body............. :rofl: I joke, I joke :D
|
Tamon design fenders/trim pieces.
|
RB Aluminium side "Irons"
Edit: and a 2 piece E-Shaft would be nice too. |
Better eletrical system, including all wireharness and eletrical management
Carbonfiber door panels that are offset wider A more ergonomic and settling interior worthy of a true sports car. Re-engineered aerodynamical exterior from mazda themself Decently engineered Rotory engine that accepts alternative fuel or a hybrid rotory A Electronic replacement for the DTSS that doesnt mimic traction control or HICAS A non-shitty electronically controlled ABS with no-massive brick hydrualic distributor An Rtek ECU that uses MAP rather than AFM Internal engine sensors that monitors compression ratio, apex seal failure, and Internal coolant leak detection, with real time display, recording, and alarm settings. |
My own racetrack to drive on whenever I wanted.
|
One of those little "double your gas mileage!!, the secret they don't want you to know!!" chips that actually works. Even with that I'd still be less than I was getting in the EG :(
|
Originally Posted by Bizmarkie
(Post 8189474)
One of those little "double your gas horsepower!!, the secret they don't want you to know!!" chips that actually works. Even with that I'd still be less than I was getting in the EG :(
|
RE hoodvent and the small moldings that go on the bottom of the rocker panels before the rear wheel. Matching red leather rear seats would be the shit.
|
some rays engineering wheels
tein coilovers some nice cheap seats without tears in 'em :wallbash: and maybe a nice cheap running T2 oh and a short shifter and other stuff I don't remember right now |
A Border body kit and hood.
And I think this thread is a repost |
some wheels and a front mount intercooler.... sorry its not that exotic. my car really is everything i hoped it would be when i saw it for sale :)
|
Originally Posted by introVert
(Post 8188418)
Also, an intercooler that will work with my Paxton blower. Even top mount, I already have a TII hood.
Originally Posted by introVert
(Post 8188418)
And I'd settle for a reasonably priced 3 rotor crate motor.
|
ya know, i am having a HELL of a time finding rings and an oversized cam shaft for the 13B, tried kragen, summit, autozone... etc etc etc... anyone have any ideas?
if i can't find them some guy has a 13C for 2500, he also said he had a 14D which is MUCH better for 3500.. not bad... :) |
A mint condition original center console lid =p
|
high compression rotors... i would love to have 11 or even 10.5:1 rotors
|
Lightweight doors in any material. In an affordable price range, that are high quality.
A dash board that dosent scream 80's too would be awsome. |
a badass mazdaspeed knockoff shiftboot haha
|
Let's see.
1. An engine I can push over 4.5k without worrying about getting coolant into the chambers (OK, so I'm rebuilding the original engine to fix this, but still it is what I want most...). 2. An affordable and easy kit to put a Renesis in the FC. 3. A redesigned top that has something resembling visibility when it's up, and a boot cover that attaches solidly enough that I don't frert about it flying off at highway speeds when I have the top down. |
i just want a new fuel system that works and the fuel management to go w/it
|
heh
an s5 front bumper for cheap. mazda wants over 600 dollars? can u belive that!?!?!?!
|
a dog gear box with 5.1 final gear or a 20B engine
|
20b-3m Ceramic Seals
Gt-45 Turbo Pport Fmic Power Fc R-tek Water-air Cooler All S5 Moldings Bumpers Glass Sunroof Panasport Wheels Dual Re-dumper Exhaust Dual 10's Kicker Of Course Everything Polished |
4.77 rear end gears and torsen LSD...I'm half way there...
|
A welded up sunroof
Complete car strip, galvanise and repaint Ported engine with Aluminum sides Liquid Petrolium Gas (LPG) Conversion Coilovers infini Seats and door cards 17 inch BBS wheels |
convertible hard top, and the old kaminari front end
|
what parts do i want???? how bout 10,000 dollars worth of everything.
|
a 2 peice front bumper with FC2000 top half w/ S5 style modling ad S5 stlye lower half+biult in odure style lip.
R-magic Type 225 Front fenders,and sideskirts 50mm origin rear flares RE-Amemiya Carbon Fiber rear difusser TUrbo 2 hood Sport Spoiler(the lip style one) R32 Skyline GT-R LED taillights FD interior bucket seats HKS Sequential Transmission GTUs 4.30 LSD rear end Teil Flex coilovers w/ EDFC 17" Stern Beast Face 2 wheels painted either Inoccent blue mica,Bayside blue metallic,Dayton blue metallic,Banshee blue(from project banshee on gearz) twincharged PP ITB 13B(yep turbo and supercharged w ITBs) Apex N1 ExTi mufflers true dual exhast Evo 9 brembo brakes |
carbon fiber driveshaft for the 7...
http://www.vividracing.com/catalog/a...92-p-9397.html with some chromoly axles.. http://www.speedmachineperformance.c...ly%20axles.htm |
Originally Posted by satanicmechanic
(Post 8189471)
My own racetrack to drive on whenever I wanted.
|
how about an AWD kit that replaces the front subframe with a differential/CV joint setup and adds a full time viscous center diff that bolts up to the rear of the transmission
|
Originally Posted by gxl90rx7
(Post 8201395)
how about an AWD kit that replaces the front subframe with a differential/CV joint setup and adds a full time viscous center diff that bolts up to the rear of the transmission
http://cp_www.tripod.com/rotary/pg15.htm That's all I could find with 20 seconds of googling, but i'm sure you could find more info if you are curious about it. |
Spindles that will give me more steering angle
|
| All times are GMT -5. The time now is 09:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands