My 91 vert ext. pics
6 Attachment(s)
please I need feed back I want to change the wheels but don't want it to look ghetto ...and I still want it too look like a stock sleeper...next up the suspension...
Attachment 350455 Attachment 350453 Attachment 350452 Attachment 350456 Attachment 350451 Attachment 350454 |
I would get some 17" wheels with close the same type spoke, painted or some silver but not chrome. That's just me though...
|
im partial to mesh, either 17" or 18"
|
mesh 17's..
|
Before getting wheels I would make a Cold are intake and get a filter. The stock plastic intake tubing is not very efficient.
Also how is your engine temp? Do you still have AC? |
I'm in the process of making an intake out of extra inter cooler pipe and two k&n's...engine temp is always consistent Always fixed at 1/2 way...the next time I hook up my haltech to the laptop I will tell you the exact temp...I have 2 maradyne 1250cfm fans...I removed the AC...yeah bad move ...I removed it because the 13b did not fit the mounting brackets on the 13b-re engine...I'm going to install the original 13b-re compressor back on ....yeah another bad move removing the power steering...the alcohol injection is the sh!t also...
|
Get some suspension goodies..
Im not a fan of all HP with no handling upgrades. You wont be dissapointed =D I think BBS LM will be great http://www.rbwheels.com/index.php?ma...405984b5875a18 or any upsized BBS wheels, nice and classy http://www.rbwheels.com/index.php?ma...405984b5875a18 http://www.rbwheels.com/index.php?ma...405984b5875a18 |
yeah right after i take a second mortgage to pay for those!!!!!
|
Mesh wheels r so dope
|
Get some BBS RS's. Next to a FB your driving a great sleeper.
|
[QUOTE=1991rx7vert;9336206]I'm in the process of making an intake out of extra inter cooler pipe and two k&n's...engine temp is always consistent Always fixed at 1/2 way...the next time I hook up my haltech to the laptop I will tell you the exact temp...I have 2 maradyne 1250cfm fans...I removed the AC...yeah bad move ...I removed it because the 13b did not fit the mounting brackets on the 13b-re engine...I'm going to install the original 13b-re compressor back on ....yeah another bad move removing the power steering...the alcohol injection is the sh!t also...
Alright well you sound like you know whats going then. I just thought I would be the one to point all that out. I watched my temp via my microtech software after I fabbed up a metal undertray and my temps went down from around 87 to around 84. Its kind of comforting seeing your exact temp. I have a front mount right now that I'm kind of hesitant to install because I'm worried about my engine heating. After I do install though it would be bad ass to get an alchi/water injector sys |
sweet
i lke the older models too... but i got a 2nd generation... wish i could drive a older model... well anyone have any pictures of a nice clean stock 2nd gen... please post i havn;t seen one thats super clean ... or send me some... well just saying wussup nice pictures
|
Napsterfreak15...you should get the alcoholinjectionsystems.com kit...its what I got...its complete and very affordable....works great I love watching the led light after hitting 8psi...while I'm blowing past that slow ass EVO while in third gear!!!!
|
Nice! 13B-RE swaps make my pants fit funny :) I think some BBS RS's would look real good on there. It also needs some suspension to make it a bit lower and balance out the new-found power.
|
check sig....
|
yeah I'm trying to decide if I should go with (option 1)- tokico blues struts and ground controls or eibachsprings, with godspeed sway barts or (option 2)- tokico's and racing beat convertible springs, and racing beat sway bars(front and rear)...the racing beat package will run me about $480 (shipped+ 269 w/tokico blues) which is about 80 bucks more that option 1
|
Signature test
|
go with the coupe racing beats, the vert springs do not lower the car enough
|
Also partial to some hot mesh. heres how it woudl look on your car (we had the same ones) .. fyi this is the only set i know in existence so no i dont know where you can get them lol.
http://i21.photobucket.com/albums/b2...e/IMG_2924.jpg http://i21.photobucket.com/albums/b2...e/IMG_2830.jpg http://i21.photobucket.com/albums/b2...e/IMG_2918.jpg |
^^Beautiful car w/ beautiful rims, I see a fmic - propbably a kickass rotary as well
|
All times are GMT -5. The time now is 01:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands