LED FTP Lights
http://cgi.ebay.com/Fantastic-Wide-V...QQcmdZViewItem
http://www.sure-electronics.net/DC,I...-MD061-1-b.jpg http://www.sure-electronics.net/DC,I...-MD061-2-b.jpg would be easy someone should do it :icon_tup: |
do it for us. :icon16:
|
i might try it as i need to redo my FTps. but firstim woking on a new headlight setup
|
i might try it.. they cheap enough..My FTP lense when i first got em, i had to refinish em/take em apart to clean em since i got em for a junk yard, so i already know how to open em...
Figure get the led clusters, open up the FTP lense, drill a hole for the wires to go out, then glue the led strip via adhesive sealant glue, then seal up the hole wiht the wires passing through with the glue as well. Then wire them up. =p I just used their smaller cluster for license plate lights , so its getting addicting playing around with these =p http://i29.tinypic.com/33f49c2.jpg |
Thanks for the idea!!! MUHAHAHAH
Me and my friend have a bunch of soder, circuit board, and a shit ton of time... lol so im gonna make some once we get like 50 led's..... |
Oh god, that'd be so bangin.
I really need to start doing LED lights on my car. |
id imagine LED runnin lights might look like this
http://i26.tinypic.com/52z0v8.jpg would be pimpage too |
6 Attachment(s)
all you need to do is buy the amount of led you want and buy the same amount of resistors acording to the color of led. drill holes that are perfect for the led. the led have edges on them. you can press in the led to the hole and have it not push all the way threw. then you wire up like shown below. the bare pegs get a ground. the red wire is obiously a power sorce.
Attachment 720428 i did this as my first LED project. i need to go back in and put more led in there so it doesnt look so "wierd" and "ricey" but hell . it was a try .. and it turned out great Attachment 720429Attachment 720430 Attachment 720431 Attachment 720432 Attachment 720433 i broke one led on the passager side so it does not light up.... so there is a big gap. other then that. if i were to do this again i'd put 3 times as many led and not nessasaraly the more expencive "supre bright" again this is a trial and error project. not to look good. but just to try and see if i could do it. honestly i really dont like how they look right now. |
I'd just pay the 9-12 bucks for the light rail. You're spending a few bucks on LED's and resistors anyways.
|
make it look like the Audi S5 or R8, very coo!
|
Originally Posted by CarzArKoo1
(Post 8112808)
make it look like the Audi S5 or R8, very coo!
Originally Posted by bcool
(Post 8112803)
I'd just pay the 9-12 bucks for the light rail. You're spending a few bucks on LED's and resistors anyways.
and if any led goes out. because its not all inline with one resistor. you can easily troubleshoot and replace one led instead of not knowing what is wrong where. depending on how its wired. :) |
I put driving lights in my FTP's to use instead of those ugly yellow pop-ups. I wish led's were bright enuff to light up the road effectively.
|
show a pic of those driving lights. i was thinin about doing something like that but wanted to see some pics first.
|
Originally Posted by fc3schick87
(Post 8112834)
hah actualy after i did this mod. i saw an 08 audi go by.. i was kinda mad.
well i spent less then 10$ on 10 led and 10 resistor at a local shop. online they are cheeper, http://www.oznium.com/ but i didnt want to wait. i wanted to try it right away. and if any led goes out. because its not all inline with one resistor. you can easily troubleshoot and replace one led instead of not knowing what is wrong where. depending on how its wired. :) thanks for your input fc3schick, im still planing to do the 3rd brake light so making my own might do.. gotta wait til the electronics warehouse by me opens up tomarrow =p For the ftp id probably go with the white leds |
i normally don't like Light mods
but that shit is fly as hell!:icon_tup: great job! |
quick photoshop
http://i25.tinypic.com/o9jq.jpg it would obiously look different night.... im thinking 2 row? or maybe 3 My bottom bumper lights wont be on since they are jdm, they only flash. |
What kind of bumper/lip is that... I want one... and where'd you get those clear turning lenses? I want some of those too... And I'm diggin that flat black paint too
|
kit is gp sport, typically common bodykit, tons of copies.
the bumper lights are stock, today i took em apart and removed the orange lense. :icon_tup: |
Hyper, you know I love you right?
No, not seriously. I love your brain. |
I think they would look great with a denser packing of LED's. If the 2 rows of LED's are bright enough, then the density wouldn't matter.
|
Originally Posted by Hypertek
(Post 8114419)
kit is gp sport, typically common bodykit, tons of copies.
the bumper lights are stock, today i took em apart and removed the orange lense. :icon_tup: |
I have considered doign this for a long time with seperate LEDS but never got around to it, but now that I see how cheap the premade rails are Im going to do it this week or next.
|
Originally Posted by ATRON3000
(Post 8114751)
Huh? Wha? took apart and removed the orange? so in the pic there is no lens there? My mind is just making up the clear lens I think I see?
|
Originally Posted by Hypertek
(Post 8114795)
I think i have jdm pieces, there is a orange lense inside the housing that gives the color... I took the housing apart and removed the orange lense.
|
i think ill stick with the jdm ftp's
|
here is what fc3schick87 look like , these are with a dark shade over ftp , she has sense removed the shade
http://i191.photobucket.com/albums/z...4966f51ffa.jpg http://i191.photobucket.com/albums/z...c9488c7ce5.jpg |
Originally Posted by Hypertek
(Post 8113170)
thanks for your input fc3schick, im still planing to do the 3rd brake light so making my own might do.. gotta wait til the electronics warehouse by me opens up tomarrow =p
For the ftp id probably go with the white leds |
FC3s chick, would it be hard to install the leds in the FTP while they still were on the car? or would it be too much trouble. Cuz i dont wanna break em takin em out lol...
|
sorry to revive this old thread but i just did this. i put 9 white LEDs in each FTP lens. i was able to seal it all up so its waterproof and easily removable.
http://endlessnite.files.wordpress.c...eb8b9237_o.jpg they are pretty bright at night, but from a distant they all blur together. not sure what look i was going for but i think it worked out all right. http://endlessnite.files.wordpress.c...9e315851_o.jpg http://endlessnite.files.wordpress.c...067fcc97_o.jpg |
^ ^
Pimp vert! I dig it! |
oOo looks pretty cool..
sick vert too.. more slammed/low offset style verts are poppin up now |
that does look pretty cool
amber ones would be win |
Originally Posted by aznpoopy
(Post 8282282)
that does look pretty cool
amber ones would be win |
that is a bad ass vert!
|
All times are GMT -5. The time now is 04:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands