RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)
-   -   did i get a good deal? (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/did-i-get-good-deal-848763/)

solpower 06-28-09 10:07 PM

did i get a good deal?
 
today i just purchaced a full turbo2 swap with only 17k miles on it spec stage 3 clutch apexi safc greddy type s bov (not a egay one) and the seats with speakers in the headrests for 780 cash do yall think thats a good deal?

EvilWankel 06-28-09 10:21 PM

If it isnt held together with JB weld and hot glue then sounds like a deal.

rxdrift7 06-28-09 10:40 PM

pics

dawicka2 06-28-09 10:43 PM

What is the compression on the engine?

Is it the same series as your car?

john ny

Grip 06-28-09 10:45 PM

sounds way to good to be true. my guess....no compression.

rxdrift7 06-28-09 11:20 PM


Originally Posted by Grip (Post 9321788)
sounds way to good to be true. my guess....no compression.

Maybe, maybe not, my motor was a killer deal as well. Sometimes you just get lucky.

Grip 06-28-09 11:34 PM


Originally Posted by rxdrift7 (Post 9321848)
Maybe, maybe not, my motor was a killer deal as well. Sometimes you just get lucky.

true story.

did you do a compression check before you purchased yours though?

Twins80s 06-28-09 11:37 PM


Originally Posted by rxdrift7 (Post 9321848)
Maybe, maybe not, my motor was a killer deal as well. Sometimes you just get lucky.

+1 back in my honda days I picked up a b16a with tranny for 400. The motor is now boosted in a different car and the guy has had no problems with it.

hell I mean I got my turbo motor, tranny, ecu, harness, dash harness and afew other randome things for only 1000

rxdrift7 06-28-09 11:39 PM


Originally Posted by Grip (Post 9321878)
true story.

did you do a compression check before you purchased yours though?

Nope. It was a miracle it was good. I didn't know much about buying motors back then. But got an s4 TII with 6k miles on an Atkins streetport with a t043b, greddy type R, act street strip, external waste gate, etc... For 650. Guy didn't know what he had and I didn't know what I was buying. Ran super strong for about 7 months.

Lost the rear rotor the other day though.

solpower 06-29-09 12:00 AM

i didnt check the numbers on it simply because its out of the car but the guy did give me a startup guaranty so i hope it works alright lol and ill post pics tommorow

dawicka2 06-29-09 01:35 AM

^^^^LOL. Your potential low compression engine will still start. Ask him about his more appropriate "shit compression guarantee".

780 is a good deal (assuming rebuild is needed), if you purchase an atkins rebuild kit and rebuild and port it yourself. Thats 2 grand for a ported engine.....thats good deal territory if your housings and rotors arent trashed.

Always check compression first.

No one selling you a used engine is trustworthy except people you personaly know, atkins, japan2la, and corksport(no mo jspecs tho).

john ny

REPU_74 06-29-09 02:00 AM


Originally Posted by Twins80s (Post 9321884)
+1 back in my honda days I picked up a b16a with tranny for 400. The motor is now boosted in a different car and the guy has had no problems with it.

hell I mean I got my turbo motor, tranny, ecu, harness, dash harness and afew other randome things for only 1000

NO PISSSTON TALK SHOULD BE EITHER ALLOWED OR MENTIONED IN THIS FORUM ENTIENDES MI AMIGO!!!!:facepalm3::nono::nono::dammit::pow::pow: :icon_no2::icon_no2::icon_tdow::icon_tdow:lol::lol ::lol:

RRTEC 06-29-09 08:38 AM

Aw don't be so rough on him guys.. I would assume with the modifications that the motor has been thrashed on a little.... I would check for even pulses by removing the sparkplugs and rotating the engine by hand, if you get 3 on each (even and strong) then you are probably ok to drop it in if you are on a budget. You may want to consider cracking it open and replacing the seals though.. Eh wth plop it is see what it does.

Rob XX 7 06-29-09 08:50 AM

even if the motor needs a rebuild he got a great deal when you factor in everything he got with it, and that he got it all at once and did not have to search all over the internet trying to get parts.

that is saying by "full swap" you mean the trans and rear end too right?

You guys are telling me he did not get a good deal for all that???

solpower 06-29-09 12:09 PM

yah full swap as in engine trans wiring harness rebuilt turbo all sensros accessories wiring harness hks downpipe driveshaft no rear end though plus all the extras i mentioned he said the only reason he was getting rid of it was because rats got into his interior harness and ate it to pieces and instead of just replacing the harness he went ahead and dropped in a 5.0 cobra engine lol

Rob XX 7 06-29-09 12:34 PM

even if that motor needs a rebuild you made out great.
Remember also when you get a rebuild you now have a full swap and a fresh rebuilt motor so your good to go with a fresh motor versus someone else who has unknown mileage on thier set up.

Chances are your motor will be good if the guy is giving you a start up gurantee.


All times are GMT -5. The time now is 09:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands