CorkSport Catback Pics
So I installed the catback I ordered, after much suffering heres the result.
http://delivery.filesend.it/1/Rotary...2208_1747a.jpg http://delivery.filesend.it/1/Rotary...2208_1935b.jpg As for sound, it's not too loud when at idle it's OK for where I live, I'm gonna get the silencer and see how it is after that. Did it make a difference? Well it's a automatic N/A so I can't say much but I do feel a tad better throttle response and the pick up seems much quicker, I only hit 90 but that was rather quick on the street I drive on alot, it hit 90 pretty quickly; I didn't expect that :lol: The pitch in the higher rpm's is also ALOT better, not as weed wacker sounding, putting on the catback was much easier then removing the stock I must also say. -Chris |
Nice job, very flush :icon_tup:
|
Originally Posted by K!NCH
(Post 8008321)
Nice job, very flush :icon_tup:
I know its a N/A I'm not talking about fire burning the bumper but is it too close? I can bend it alil more I thinks (I also think it'll sag on its own as it settles in) the bumper was warm, luke warm after doing a few 1st to redline and 2nd to redline pulls (its a auto LOL 3rd wont go near the redline not even near 3krpm) so it was fully warmed up, its cold out side so my dads still alittle worried it may warp out the bumper. |
congrats cmanns, lookin' clean. :bigthumb:
|
Yeah i would be worried about the clearence to, i would get a little more room between the tip and the bumper, i melted a bumper myself. it sucked i was mad.
|
Oh yeah, it looks great though
|
Originally Posted by Rx-7fetish
(Post 8010031)
Yeah i would be worried about the clearence to, i would get a little more room between the tip and the bumper, i melted a bumper myself. it sucked i was mad.
We do smell this weird burning like smell after driving, I'm guessing its the new pipes? Anyways were going on a longer drive today to the next town, I'll see how it looks then. Next plans are header and mid-pipe ^_^ I got the silencer for the corksport as it is a tad too loud for where I live, I'll post if it made much of a diff for 20bucks. |
yea the exhaust pipes will smell for a little while..kinda rich sweet smell because of the new pipes and it will get louder as the muffler will loost some of the packing from being used. now next on the list is a t2 5spd tranny swap..
|
you will want to do some modifying with the silencer. It is kind of small for the pipe so it will rattle a little bit and make an annoying sound. So bend up the edges of it.
|
looks good! whats next a 5speed swap?
|
wait, 90 as in u topped out at 90?
|
I believe he means he only ran it up to 90 mph...
|
Originally Posted by t24todd
(Post 8018859)
yea the exhaust pipes will smell for a little while..kinda rich sweet smell because of the new pipes and it will get louder as the muffler will loost some of the packing from being used. now next on the list is a t2 5spd tranny swap..
I'll be going with a full exhaust system soon, drop in k&n and when I do the tranny swap maybe get the engine ported and have a decent N/A.
Originally Posted by ohayou88
(Post 8018869)
you will want to do some modifying with the silencer. It is kind of small for the pipe so it will rattle a little bit and make an annoying sound. So bend up the edges of it.
Originally Posted by DriftN7
(Post 8019259)
looks good! whats next a 5speed swap?
Originally Posted by That
(Post 8019313)
wait, 90 as in u topped out at 90?
|
Lookin' good, man!
|
Originally Posted by That
(Post 8019313)
wait, 90 as in u topped out at 90?
Originally Posted by rx7fan1903
(Post 8019813)
Lookin' good, man!
As said that it would burn the bumper, no it had about uhh 1inch clearance, maybe a tad less, I didn't have the left doughnut on (Couldn't get the mofo on (Nor could my dad whom has I guess a tool to help with doughnuts) so I gave up :icon_tdow on a 1hr drive to and then back, we smelled this horrid stuff, turns out the pipe hit the side of the bumper and burned alil hole, you can't see it unless you are looking under the bumper luckly :) I really should get that doughnut on :scratch: btw the corksport is REALLY loud w/out silencer now, also the silencer I bent the tips all around yet it still rattles abunch, the silencer also doesn't sound too good when you give little throttle and let off it makes poping sounds :icon_tdow:icon_tdow:icon_tdow:icon_tdow like farting :hahaha: |
Mine does the same thing with the silencer. I ended up getting a presilencer from racing beat which toned it down at low rpms. It is still loud when you get up there but I am used to it. I guess if you got emissions though its tough to swap in one.
|
I was thinking of putting some sort of film around it, I dunno something really sticky that may melt and cause a sort of seal, of course you could just yank it out again, and its not like it's going to cause a fire.
Once I move, silencer will be tossed out anyways :P, I like the sound of it at idle. Where I live it's 55+ people and to live here without causing issues I needed teh silencer |
pimpin'
|
CS cat back. Everything else is RB. Had to custom fit the connecting pipe coz rb won't bolt into CS: cat-back > connecting pipe > rb pre silencer > rb downpipe. With all the RB stuff (esp the presilencer) it doesn't sound "too" CS. I heard CS is loud. Mine isn't coz of the pre silencer I love this exhaust. Tight fit, flushed, nice angle, nice sound, and perfect siize. Other exhaust that I've seen are not flushed, huge canister, no angle. not my preference. https://img.photobucket.com/albums/v.../rP1012212.jpg https://img.photobucket.com/albums/v.../rP1011581.jpg https://img.photobucket.com/albums/v...P1011611-1.jpg https://img.photobucket.com/albums/v...austSystem.jpg https://img.photobucket.com/albums/v...t/CIMG4133.jpg https://img.photobucket.com/albums/v...t/CIMG4132.jpg |
Yep the angle is awesome. I don't mind the noise at all.
At idle its like a harley cept when you touch the gas it gets a tad pitched, its very deep though. WOT it's uh, not sure I can't remember, doesn't make my ears bleed though LOL. It's awesome without the silencer, I'm looking to get a pre silencer & downpipe soon +1, I'm keeping stock pipe sizes from the engine to the catback, 2.5, full 3" would be too much :[ |
Here is a picture of mine:http://img78.imageshack.us/img78/502...6updateti2.jpg
|
I'll throw in
http://i51.photobucket.com/albums/f3...W/DSC_1094.jpg broken taillight? someone rearended me at school |
|
Looks good. I'm all about single exhaust, and you have to watch that bumper. Youve got an n/a so its not quite as bad, but Ive pulled alot of melted pastic off my bumper lately.
3in cs downpipe, 3 in stainless midpipe, 5zigen gn+ Dolphin tail catback. Woo flames! http://photos-a.ak.facebook.com/phot...31840_7292.jpg |
looking good guys.
|
All times are GMT -5. The time now is 10:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands