Cheap dish wheels!
saw this on zilvia thought some of you guys might wanna check em out.. so people can stop dreaming about Rotas and Sportmaxx lol
http://www.cruizinconcepts.com/image...MACHANT_LG.jpg http://www.cruizinconcepts.com/godsp...ls_mustang.asp http://www.cruizinconcepts.com/saleensscwheels.asp http://cruizinconceptswholesale.com/...5silver_lg.jpg http://www.cruizinconceptswholesale....rtsilverlg.jpg http://cruizinconceptswholesale.com/...orsport_lg.jpg |
lol im sure
|
deep dish versions of old Saleen mustang wheels AWSOME!!!!
|
depends on who you ask, i guess
|
the last one's are alright i guess...not so much for the others
|
yea i would take the black ones it would look better on an FC.
|
The last two are sick, but I'm having trouble with the links :(
|
|
Originally Posted by SDrotary-FC
(Post 8457079)
|
not bad thought.
But i bought my sport maxxes for 420 shipped of ebay before they were widely known. |
The first ones dont look that bad
|
Anybody know how much they weight? The look heavy as hell.
|
17x9 +24 sounds like it will stick out too much w/o wider fenders
|
im running 18x10s and they fit stock fenders.. You just gotta make em fit
|
2 Attachment(s)
Originally Posted by Slammedblk7
(Post 8461026)
17x9 +24 sounds like it will stick out too much w/o wider fenders
|
I want to check into a set of these.
|
any one have a set of these yet...I want to see an fc dumped and kitted with these wheels. If no one else delivers I will after I fix my car and get the money.
|
Originally Posted by Slammedblk7
(Post 8461026)
17x9 +24 sounds like it will stick out too much w/o wider fenders
not bad by the way with the wheels... any reviews on them? |
hmmmmmmmmmmmm........ how much do those 17x10 weight ilkie
they almost look like fikse wheels |
Hypertech do you have a link to the zilvia thread you got this off of. I want to know the weight and see an S-chasie kitted and dumped on these :)
|
Originally Posted by Slammedblk7
(Post 8461026)
17x9 +24 sounds like it will stick out too much w/o wider fenders
http://i55.photobucket.com/albums/g1...c/IMG_0754.jpg |
heres 17x9 +22
http://carview-img02.bmcdn.jp/carlif...1403504/p1.jpg |
hella flush!
|
So a 17x9 +24 will fit with stock fenders? What about with Stance GR+ coilovers as well?
|
I dont think coilovers change fitment, if anything they will help since they free up some room due to the smaller springs. They also help since you can change the camber to fit it under the fender better.
|
Originally Posted by 0verb00st
(Post 8639949)
I dont think coilovers change fitment, if anything they will help since they free up some room due to the smaller springs. They also help since you can change the camber to fit it under the fender better.
|
I think you can mess with the caster settings to fix your problem.
|
Originally Posted by K!NCH
(Post 8639669)
So a 17x9 +24 will fit with stock fenders? What about with Stance GR+ coilovers as well?
|
would the 17X10s with 20mm offset fit a stockbody FC with coilovers and rolled fenders?
|
Depends on the size of tire you want to run.
That size and width would put your rim 12.7mm farther out than flush. You could probably get by if you stretch a tire on it. The rears should be fine depending on how much camber you dial in & tire size. |
Originally Posted by MaczPayne
(Post 8640052)
Yes. You'll have about 3-5mm of clearance to the coils. Should be no problem unless your wheel bearings are sloppy.
|
You'll get more tire-fender clearance, but rim to coilover clearance will still be 3-5mm.
|
Originally Posted by MaczPayne
(Post 8678987)
You'll get more tire-fender clearance, but rim to coilover clearance will still be 3-5mm.
|
found pics on 240s...
http://i36.tinypic.com/2nrq8f4.jpg http://i33.tinypic.com/33msj7s.jpg http://i35.tinypic.com/3094njc.jpg I want a pair! |
wow i want
|
those look 10x better then Sportmaxx and Rotas
bet they would look good on a vert lowered |
Hypertek could sell a ketchup popsicle to a woman in white gloves.....
Those rims do look bad ass on the s13. I love RPS13 chassis kitted with deep dish's. |
Would the staggered 17x9 +24 and 17x10 +24 fit a stock suspension FC?
|
Stock suspension, yes.
Stock fenders, no. IMO, you'll need a fender roll up front, and atleast a roll, maybe a pull in the rear. |
|
/\ are those 17s or 18s?
|
17 i believe
|
so if you can do 17x9 +24 with a 255/40-17 up front and be fine with a roll, can you do the 17x10 +20 on the rear with 275/40-17? will it be flush?
|
The rear will need more offset unless you can roll&flare the rear quarters
|
i wouldnt doubt if the wheels are on the heavy side
|
Originally Posted by MaczPayne
(Post 8717042)
The rear will need more offset unless you can roll&flare the rear quarters
bullshit i run these same exact wheels on my fc no flare no over fenders |
...this thing is still alive?
|
Originally Posted by rodarry
(Post 10036207)
bullshit i run these same exact wheels on my fc no flare no over fenders
|
this whole thread is such fail. i almost guarantee those wheels are heavy as hell.
Lloyd |
wow this is an old thread...
|
All times are GMT -5. The time now is 09:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands