Build your dream FC! (If you won the lottery.)
For the sake of conversation lets just say you won the lottery. Money is of no consequence to you, and you can build your FC from the ground up from a bare frame. What components would you choose? Why? Go nuts! Lets talk about each system seperately.
-Engine -Lube -Cooling -Fuel -Electrical -Clutch/trans/Drive train/prop/ -Suspension/Steering/Brakes -Body/wheels/interior/Trix. -Extras? I'd love to see the ideas that you guys (and gals) have for going all out and doing it right when not limited by a budget. |
I'd just buy an FD.
|
Originally Posted by p4nc7
(Post 9388090)
I'd just buy an FD.
well that's no fun... |
im allready building my "dream FC"....if i won the lottery, i wouldnt build an FC with the money. Id build a house, a huge garage, an 05 STi, an FD, and a Ratrod, id finish some small stuff on MY FC, then id park it in the garage for many years.
|
Id buy jay leno's garage. buy a bed and fridge and live there. yes
|
I would buy 7 FCs. one for each day. And all of them would be different
and one one them has to have wings and can fly and has a turbine engine in the hatch I also want one thats AWD |
Id have Scoot build a copy of the engine in their 4 rotor FD
http://www.youtube.com/watch?v=FBZL-GGbA4s so id assume whatever ecu/management they run with that setup. Aero package would consist of Foresight bodykit http://pds.exblog.jp/pds/1/200904/11...1_11541891.jpg 30mm vented Msport front fenders, pulled rear RE-Amemiya rear spoiler Volk VSXX 18x9 18x10 wheels http://www.d2autosport.com/wheels/wo...%20VS%20XX.jpg Catalog of SuperNow suspension parts http://i25.tinypic.com/2it08r4.jpg cusco chassis braces etc Acura NSX headlights w/ HID http://supra.gr.jp/s2/owners_item/10033.jpg http://www.mirai.ne.jp/~marcy/html/of/18.jpg Recaro SRD drivers seat http://www.paragon-products.com/v/vs...ro_SRD_4-2.jpg Safety 21 roll cage hand crafted titanium exhaust wrapped all teh way to a hks canister out the back hks gauges and instruments kaaz 1.5 way lsd Carbon fiber flat paneling underneath the car paint a deep gunmetal metallic gray when all said and done, park next to a stock FD and slap myself for wasting my money on a fc when stock FD is gorgeous lol |
I'd start out with my current base model, I like the fact it has no sunroof and manual everything, plus I went to Texas for this rust-free example, no way I'm giving it up :lol:
-Engine I'd buy a bungh of 13B-REs and experiment with all types of porting and build techniques (DIY). Once I came up with the optimal setup, I'd install it into the car with a GT40R and a fancy Motec ECU, running on E85 of course. I'd probably splurge for some brand new OEM housings, possibly irons too. Then a 20B when I get bored. -Lube Probably mostly stock, I don't think I'd really need a dry-sump setup or anything. -Cooling Pretty standard; Koyo radiator, maybe an upgraded oil cooler. -Fuel Probably 6 injectors (1600cc?) to support the E85, probably dual fuel pumps too. All lines would be black SS lines with black fittings (I hate the standard blue/red and silver SS lines) -Electrical FD alternator, relocate battery to one of the bins -Clutch/trans/Drive train/prop/ A fancy twin-disc setup. Rebuilt/strengthened stock trans. -Suspension/Steering/Brakes 5-lug conversion, Fancy-ass coilovers, Evo brakes -Body/wheels/interior/Trix. Stock S4 body [puts on flame suit], 626 lip modified to extend to the front wheel arch (stock ends are a little too short), a brand new shiny coat of Pure Red, 17" Work Meister S2s in the Bright Buffed Finish, A nice head unit and a single 12" subwoofer hidden away somewhere, Bride seats (not sure which model exactly), Nardi Classic steering wheel -Extras? A hatch full of money and sexy women who will TIIDB. Of course, the above applies to my 'mean street car' FC. I'd also have a purpose built track car, with crazier suspension stuff and some aero (I'm pretty big on the FC2000 front end :).) |
Why dream?
|
Originally Posted by need RX7
(Post 9388501)
I'd start out with my current base model, I like the fact it has no sunroof and manual everything, plus I went to Texas for this rust-free example, no way I'm giving it up :lol:
-Engine I'd buy a bungh of 13B-REs and experiment with all types of porting and build techniques (DIY). Once I came up with the optimal setup, I'd install it into the car with a GT40R and a fancy Motec ECU, running on E85 of course. I'd probably splurge for some brand new OEM housings, possibly irons too. Then a 20B when I get bored. -Lube Probably mostly stock, I don't think I'd really need a dry-sump setup or anything. -Cooling Pretty standard; Koyo radiator, maybe an upgraded oil cooler. -Fuel Probably 6 injectors (1600cc?) to support the E85, probably dual fuel pumps too. All lines would be black SS lines with black fittings (I hate the standard blue/red and silver SS lines) -Electrical FD alternator, relocate battery to one of the bins -Clutch/trans/Drive train/prop/ A fancy twin-disc setup. Rebuilt/strengthened stock trans. -Suspension/Steering/Brakes 5-lug conversion, Fancy-ass coilovers, Evo brakes -Body/wheels/interior/Trix. Stock S4 body [puts on flame suit], 626 lip modified to extend to the front wheel arch (stock ends are a little too short), a brand new shiny coat of Pure Red, 17" Work Meister S2s in the Bright Buffed Finish, A nice head unit and a single 12" subwoofer hidden away somewhere, Bride seats (not sure which model exactly), Nardi Classic steering wheel -Extras? A hatch full of money and sexy women who will TIIDB. Of course, the above applies to my 'mean street car' FC. I'd also have a purpose built track car, with crazier suspension stuff and some aero (I'm pretty big on the FC2000 front end :).) |
Originally Posted by Hypertek
(Post 9388499)
Aero package would consist of Foresight bodykit http://pds.exblog.jp/pds/1/200904/11...1_11541891.jpg 30mm vented Msport front fenders, pulled rear RE-Amemiya rear spoiler I like the FD, for sure...however the FC is a whole different beast. I think a cherry FC really has a lot more character than an FD. I know that sounds insane, but i mean it. |
i know i'll get booed for this but
-Engine Volvo T5(B5254S) RSI H-beam rods Honda B20 pistons(ets.9.3:1 CR) "Bondo" turbo manifold GT2871R .64 a/r Custom intake manifold Racingbeat catback custom downpipe/testpipe -Lube stock RX-7 oilcooler Royal purple nuff said -Cooling custom egay radiator more royal purple -Fuel Supra TT fuel pump new lines 750CFI injectors -Electrical MSII V3 w/spark extra Saab APC boost controller -Clutch/trans/Drive train/prop/ Cusco multiplate,M90(or T56),Aluminum driveshaft,T2 rear end with Cusco RS 1.5 way diff -Suspension/Steering/Brakes Supernow everything Brembo Brakes close ratio rack -Body/wheels/interior/Trix. T2 hood,modded FC2000 front,RE-A sideskirts,R-magic rear add-on,Tamon Design front fenders, door moldings, origin 30mm rear flares,Shineauto rear diffuserw/extra peice,shineauto hatchwing, Innocent blue mica paint, 17x8/17x11Panasports G7 C5C2s -Extras? LED S5 tails,LED turns,HIDs,angle eyes,Carputer,LCD dash display,Digital thermostat, 1 12" Infinty Cappa perfect, custom box, nardi wood grain steering wheel,Bride racing buckets, FD3S interior |
i like your idea of a thread starter alot! so im gonna contribute but i wont do a crazy technical list ill just keep it simple
fc one: crazy base model 13b n/a build with either dual mikuni or fuel injected ITB's, full suspension from super now, chassis refresh and strengthening. stock s4 body in crystal or nobel white, with lip TII sides and re amemiya rear diffuser and GT wing.(total track car) fc two: base with TII drop in with support mods to push 300-350hp along with the same suspension and chassis mods as previous. but in arctic silver and turbo/s5 wing.(daily driver with intentions to kill) fc three: yet another base build but with the 13bMSP from the rx-8 this time. straight drop in no mods just the essentials to make it run optimum performance from factory with exhaust, light weight flywheel and a good clutch too. same suspension and chassis mods as previous ones. this one will be my sapphire blue touge car! :devil: and of course to finish it off my choice of rims will be: advan model five, R32 GT-R wheels or advan RGIIs as you can see i like the light weight factors of base models :D |
20b done deal...
|
id get 2 fcs cut off about 5" off the passengers side on one and 5" off the drivers side on the other... put them both together and ducktape them then you have 4 wheel rwd and lots of fun with your friends... saw something like this on tom green
|
I say start off with a hardtop base model.
-suspension- 5 lug swap, mazdaspeed wheels, 3 way ajustable coilovers with remote resevoirs, ajustable front swaybar, heim joints to replace all suspension bushings, individual camber adjusters in the back, modded lower control arm (for more steering angle) etc. -brakes- 6 piston front brakes, 4 piston rear brakes, and brembo non drilled and non slotted blanks all around for rotors, braided brake lines, upgraded brake master cylinder and hydraulic hand-brake. -motor- build a all aluminum perephial port 4 rotor based off of the 13b housings, dry sump, individual throttle bodies, lightened s5 high compression rotors, fully balanced, carbon apex seals, megasquirt, aluminum gilmer drive pulleys, aluminum flywheel, electric water pump, electric powersteering pump, upgraded alt, dual core aluminum radiator, dual oil coolers, individual coil packs, and heck mine as well add a third spark plug wile we are at it. -drivtrain- T2 tranny with beefed up internals, dual plate clutch, aluminum drive shaft, either mazda speed for wheels or a set of steel racing wheels 16x8.5" all around, 1.5 limited slip. -chassis- strip the chassis down to the bone (no carpet, no dash board and grind off all unesisary brackets), cromoly roll cage with nascar styled door bars, triangulated front strut bar and other frame stiffening braces. -exterior- carbon fiber hood, sideskirts, stretched front and rear fenders, formula one styled carbon fiber mirrors, s5 bumper with carbon fiber/kevlar lip, carbon/kevlar wing, aluminum flat bottom undercarriage, carbon fiber doors, lexan rear window, the whole car painted black (yes over the carbon fiber), nsx headlight conversion and s5 modernized tailights with spyder LED bulbs. -interior- momo seats (black), momo 6 pt harnes (black), momo shifter (black), momo steering wheel (black), some kind of digidash and the roll cage paited red. Ohh yeah and me driving it! |
already building it.
didnt need lotto either (but would of helped) |
13bre. Bridgeported. GT35R or GT37R. Stock J spec tII trans. Q16 as primary fuel. Stock body. Stock 10AE wheels with 26x10.5 ET Street radials. 4" Turbo/IC piping Haltech E8 or E6X. Cheap simple seats like JAZ racing ones. Twin 3" pipes strait back. ETC
Shoot for 500whp |
Originally Posted by Loose10AE
(Post 9409781)
Stock 10AE wheels with 26x10.5 ET Street radials.
|
Originally Posted by need RX7
(Post 9409818)
I've always wanted to have a set of stock wheels widened like 3 or 4 inches, install some longer studs and space them way out so they fit flush and hide some serious rubber. Sleeper :)... unless you're looking at it from the rear :lol:.
Then I also dont need to worry about fitment. :) |
I would do what I am going now. I don't need the lottery, just Pell Grants:
What I have: 91 vert, Mint Interior CF reclining bucket seats. What I need on the interior: http://www.shop.retro-spec.net/categ...?categoryId=11 CF mirror covers, demister vents, gauge dash cover and possibly idiot light surround. Exterior: What I have: R-magic widebody kit with modified front bumper (otherwise hideous) with integrated sleek headlights and projectors w/hid. modified aluminum hood with vents. What I need: Shine RE-A rear CF diffuser, modified rear bumper to match overfender width in rear. CF gt wing or my own lip spoiler wing on the trunk. LED my factory tails New Top. Engine: What I have: 01 ls1 with 28k miles from a WS6 transam. Bone stock. ;) What I want to do in future. Headers, port and polish heads, cam, roller rockers and springs. Procharge. Wheels: What I have: 5zigen FN01rc 18 x 9.5 +12 offest all the way around. Suspension: What I have: Bone stock What i want: No clue. Coilovers with new bushings and mounts, sway bar and strut tower braces. Brakes: What I have: Rust What I need: slotted and drilled rotors with hawk hp pads, ss braided lines. |
For real. Don't half step.
Originally Posted by Dorifter_LEXX
(Post 9388725)
Why dream?
|
Car anything without a sunroof.
-Engine LS2 into a 7.0, wet-sump, Wiesco pistons, Lunati rods, Callies Crank TEA Trickflow heads Ported Fast 92/92 JTR 1 7/8th longtubes Specced cam All the neccessary parts and bolt ons -Lube Stock -Cooling Custom radiator (Ron Davis) and a Spal fan B&M Oil cooler -Fuel E85, 60lb injectors, Bosch 044 pump, Aeromotive rails -Electrical All autometer gauges -Clutch/trans/Drive train/prop/ OZ Texteria(sp) clutch with Flywheel T-56 Custom driveshaft 04 Cobra rear end with DSS axles and 4.10 gears -Suspension/Steering/Brakes Tein flex Manual steering BBK up front (KVR?), RZ kit in rear -Body/wheels/interior/Trix. RE front clip Stock S5 body otherwise except for: Mariah front fenders, Corksport overfenders, molded in Tornado Grey paint Wheels would be 5Zigen FN01RC's, polished, 17x9 up front, 17x10 in the rear 245ish tire up front, Nitto 555 295 in the rear, Nitto 555R Stock TII black interior other then Autometer gauge cluster and shift light -Extras? 150 shot of nitrous in case someone has more power. |
- Engine : J spec 13B-T fully rebuilt to 100% Factory condition except with Cermet coated housings for the purpose of reducing friction and increasing reliability.No power mods except for a nice flowing Exhaust and a good Cone filter. why? because driving a slow car fast is much more rewarding than just simply having a fast car.
- Lube : Castrol GTX 10w 30 of course. - Cooling: A simple Koyo radiator and whatever electric fans will fit? lol Dont know much about them. Factory oil cooler should be adequate..However I would invest in a NEW one that is clean and gunk free. -Fuel : Stock fuel, But with 100% new OEM parts or replacements. -Electrical : Is there something wrong with the electrical system? Even if there wasn't ..once again..replace all componants and restore to 100% factory condition. -Clutch trans drive train etc : Clutch and transmission ..why OEM of course, and rebuilt stock tranny *shrug*. The only drive train Mod would be a Clutch type diff. - Suspension : Bilstein or Ohlen coilovers if they even make them. Since I am rich I would have them custom made if necessary. Replace every arm on the car with a Pillow Ball equivilant. Get rid of the Damn Toe Steering Shit - Brakes : Im not sure what brake mods are preffered to the FC. Since I am rich, I would take into account the cars new weight shifting tendencies with the suspension changes and CG changes I would make..and setup a Brake bias which uses 100% of available grip on all 4 tires and is capable of handling as much heat as is feasible depending on how it will be driven. -Steering : Not a thing. Well..If there are beefier and more reliable componants I would choose them. But the steering angle will stay stock, FC's have less steering angle than common counterparts such as the S13 ...I would consider it a welcome challenge. -Body : S5 T2, Perfectly stock, Whatever color yellow was used on the FD. - Wheels : Enkei RPF1 16x8 or 17x9..depending on if my driving style with stock power can keep that much tire hot enough to function properly, No stretch..no unneccesary over hang..just perfect balance. - Interior : 100% original in perfect condition, Black and or grey prefferably. |
I'd give RE-Amemiya whatever it would take to have them build me the sickest track car ever. Then I would drive it on tracks all over the world.
|
All times are GMT -5. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands