Tachometer not reading at all
i have a 87 FC, N/A and I’ve recebtly done a rebuild and the tach worked fine at first. I drove it around a few times trying to break it in and I started t and get nothin from the tach or any other gauges , I know it is not a gauge cluster issue, I have resouldered my old cluster and replaced it with an OEM one. I did get the oil pressure and voltage to read by replacing a blown fuse in the kick panel but the rest of the fuses are fine and I can’t find a thread on this that talks about anything other than resouldering. Help would be appreciated,
Thanks |
Clean ALL grounds on the Trailing coil and the bracket and chassis mounts that the coil attach to.
If that does not work try a "trick" with a Wire from the single bullet connector on the Leading coil attached to the Single wire with the bullet connector on the Trailing coil. Hopefully you can make a patch wire with the proper connectors so you do not have to hack the wires. |
of verify the trailing coils are working, it may have died and need to be replaced.
|
All times are GMT -5. The time now is 07:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands