20b build 500s borg warner
 

First time around with this. So went all out. Though some of the fellas would like to keep up with the progress. So far 20b built by panspeed, 800hp support fluidyne rad, 800 hp supp oil cooler HUGE, big ass intercooler nothin special, borg warner 500s single turbo kit, N1apexi exhaust, electromotiv e/m, brembro rot/ w/wilwood 6 pot brakes front four on rear, rea GT AD widebody kit. SEXY right? Will post pics of everything soon. All thanks will go to dan devin and phillip evans.

pics of getting started
Attachment 355889

Attachment 355890

Attachment 355891

Attachment 355892

Attachment 355893

maybe this worked, yep the second pic is 13 b built by phillip evans.

Attachment 355929Attachment 355930

Attachment 355931

Attachment 355932Attachment 355933got all brand new interior

Attachment 355934over to shop for color change and a little body wrk while waiting

Attachment 355935little color change
Attachment 355940
Attachment 355937before
Attachment 355936after
Attachment 355938the new interior
Attachment 355939some toys with exception of intercooler was wrong obviously too small

Attachment 355941I grabbed the red ones

Attachment 355942

Attachment 355943s 500s are pretty big I guess (DAMN!)

Attachment 355944N1 apexi
all I have for now. Will show rea kit and engine turbo kit rap hopefully next week.

dude you're gonna build an 800 horse power 3-rotor and put ebay racing seats in there? Are those 800 horsepower-supporting seats :confused:

yeah something like that. I think an rea widebody kit for around 5k will be enough to spruce up some 500$ race seats. I think the rea body kit should supp 800 hrse hehe. what kind of question is that anyway. Phillips eavns has a 600hrs two rotor, Dan devin has a 900 dyno'd triple, dee's two rotor u can watch the video of his PF dyno'd 614 to the wheels. I think we'll be fine oh and matt the guy carrying the turbo, Rotorsport of NC Brian a friend of ours that owns the place bulit his 600hrs two rotor and is now building a 1000 to the wheels triple rotor project car and has been in the business for 15 yr. we'll all be carivaning to the race in new jers next week to watch the the yellow car I have up there run 9's all day u wanna come see some fasssst race seats?

I agree drive it like u stole it. If it blows gives u a good reason to rebuild it better.

When i'm grannying around i like to put expensive interior in my daily driver. like this one.
Attachment 356024

Attachment 356025

Attachment 356026

APS plenum, JWT, skunk throttle, ur pulley,act clutch, lwt JWT fly, APS test pipes,Fujit y pipe,groundin k,XSturbo tune,xdrilled slot rot, braided brk& clutch hawk pads. tired of typn
Dyno 290@6200

so lets get this straight.
its a 20b peripheral port with a 91mm turbo?
if your goal is 800rwhp, then its going to be at like 10psi!

SOUNDS AWESOME!!

No he isnt doing the pport 3 rotor. Dan sold that to someone else. Allan is doing a stock 20b rebuilt by panspeed in the other pic. I did see the shell and it is clean as hell and he has done it all by himself, all new wiring and all which is pretty nuts.

Phil is a good builder and his FD is fuckin nuts too. Allan I do think Dan was right though, the 400s might be a better setup. That kit will look sick as shit on the car too. I know I will blow the doors off of that Z car with my ls1 fc when it is done but that FD will make me look like a miata sitting still. I think I'll have to go with a procharger setup. :)

And BTW those are not ebay seats. Damn nice seats if you ask me. You got one hell of a deal on that exhuast Allen. Shit is going to be nice.

BTW I am getting the poon friday night so I will ride with you to New Jersey, and hopefully get some Italian poon while I am there.

too bad its not a p-port. that would be an amazing setup with that s500

nice... any vids of dans 900 dyno'd 3rotor and or 1/4mile runs?
whos yellow car runs 9's all day?

will try to get some video this weekend can't get ahold of phil though, Derek give a call and let me know if ur still goin or if u talked to phil. he's supposed to be ordering the rest of my kit this week. electromotiv, exhaust man,down,feul sys,400s,BOV's, wast g,chromeoly ax kit,

turbo tommy's shit looks nice and clean, I like that.

I thinking something along the lines "safety of seats"?
they'll probably snap loose pretty quick but I really hope they dont for the drivers sake.

Hey guys, I have a 3 rotor big head that I'm trying to get rid of. It was in a drag racing car that ran 7.28 at a 1/4 mile. The engine has a lot of work on it - the most important being the Mazda Speed Chromoly Crank Shaft. This would be great for a conversation or for a drag car if any of you are interested, see my post in the "for sale" section.

Please see my post in your for sale thread.

Will have a damn good vid of Dan's car soon. He is picking it up from the builder in FL this week.

9-sec yellow car vid as requested:

http://www.youtube.com/watch?v=HZ3HTrQ-WEo

The seats will snap loose??? WTF are you talking about? Is that like blowing the welds on the intake manifold cuz ur running too much NAWS?

Please send link of vid of 1000hp widebody drag car, I would love to see that. Better yet send a pic of your seats and mods.

This car is going to be a street car, not a drag car, it will be making sick ass power and not an expense was spared on it, not even the seats.

Dude ur shit is insane. Reminds me of DelSlow's build. Check his out in the Fab section.

Please post link to ebay auction with those red seats. I'd love to see it. I have identical seats in black. Speaking of that didn't you get your entire car off of ebay???

"Delivery Day

After purchasing this car on eBay I had it shipped from Las Vegas, NV to Sarasota, FL. The shipping took a few days and the car arrived very dirty, but that was nothing that a good wash couldn't take care of. Here are a few photos of the car being delivered to my home in Florida."

Nice hood there on that car. Does it support 800hp? Was there a sticker on it that says "rated for 800hp"? I must see this for the sake of safety, because it is an ebay VIS knockoff of Knightsports and you never know.

Guys, Allen is here posting his build. He is putting every bit of money and effort into doing this right. Don't come into the thread to simply be a smartass.

mazda's RX7 specs page on 20b engines

Potential power outputs:
*The standard power output of a 20B turbo is 280HP.
*With turbos removed (naturally aspirated), these engines produce 250hp stock, 320hp if ported.
*Apparently with the mere addition of a boost controller the power jumps to around 400HP.
*Rod Millen's Pike's Peak race car made about 500HP with a nearly stock engine.
*Japanese modifiers get about 700HP without too much trouble (I suspect this would be at a level where some engine porting and severe turbos would be required).
*Racing beat's Bonneville racer makes 900+ hp with a triple turbo peripheral port 13G
*The above figures were all mid-late 1990s. In 2002 some drag racers are claiming 1200hp.


OMG as the girls say
*Rod Millen's Pike's Peak race car made about 500HP with a nearly stock engine.
*Japanese modifiers get about 700HP without too much trouble (I suspect this would be at a level where some engine porting and severe turbos would be required).

So basically any one with around 4k for a good single turbo kit and some decent tuning can easily get 700 without too much trouble. Maybe like a s400 BW?
I spent more than that on rims and tires once!