RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Yet another won't start thread? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/yet-another-wont-start-thread-812510/)

83gslRX-7 01-12-09 09:25 AM

Yet another won't start thread?
 
so now the car wont start! killed the battery, changed it, changed the plugs... nothing! it sounds diferent now, when its trying to turnover, its like one solid noise.... if that makes any sense... i dont understd its been running great!!!!!

Kentetsu 01-12-09 09:51 AM

You flooded it, which causes you to lose compression (hence the weird sound). To get it started again, just grab a can of Seafoam and dump a couple of ounces down the small barrels of the carb. She should fire right up after that...



.

83gslRX-7 01-12-09 09:55 AM

but i hadnt tried to start her for the whole weekend! could it still be flooded?

FirebirdSlayer666 01-12-09 10:29 AM

You may not be getting fuel either. I've had that happen with my FB with clogged jets. I would deflood it, clean the plugs, a little seafoam and it still sounded like it had no compression. Realised I wasn;t getting fuel thru the jets. Sprayed the shit out of them with carb cleaner and it slowly started to try and turn over. Then it finally started and ran fine after that

mazdaverx713b 01-12-09 11:15 AM

ensure that you are getting adequate gas to the carb and are getting adequate spark. when you pulled the plugs originally how did they look? were they gas soaked or full of carbon or white...?

David Dewhurst 01-12-09 11:24 AM

***it sounds diferent now, when its trying to turnover, its like one solid noise...***

Being I work from the begining I'll ask a question. Is the starter engaging the flywheel & rotating the motor? Or is the starter just whurling without engaging the flywheel?

83gslRX-7 01-12-09 01:21 PM


Originally Posted by David Dewhurst (Post 8870925)
***it sounds diferent now, when its trying to turnover, its like one solid noise...***

Being I work from the begining I'll ask a question. Is the starter engaging the flywheel & rotating the motor? Or is the starter just whurling without engaging the flywheel?

i thought that as well..... but i ran to the store.. bought rotor and cap, and a coil.... well came back got the car to start... but still only leading.. but at least it started... the distributor cap had a huge crack that i didnt notice...

mazdaverx713b 01-12-09 08:51 PM

is your tach working? tach runs off of the trailing ignition.

83gslRX-7 01-12-09 09:54 PM

tach is not working thats why i know im running only leading..


All times are GMT -5. The time now is 12:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands