RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Wiring problem: how best to proceed (https://www.rx7club.com/1st-generation-specific-1979-1985-18/wiring-problem-how-best-proceed-1068131/)

engen 07-23-14 03:19 PM

Wiring problem: how best to proceed
 
I have been putting my 84 GSL, that has been setting for a few years, back together over the last few months. Last weekend I was trouble shooting a problem with the fuel pump. It turns out that it was not getting power so I started pulling out the interior to look for the problem in the wiring.

I found this:

Should I fix this harness or try to find one in better condition?

7aull 07-25-14 03:42 AM

IIRC the REAR harness, which is what you are showing, is a separate one to the MAIN, and hooks up near the dash. If so, then the easiest thing would be a swap... unless it got cooked by a problem off the main harness, in which case you have more trouble than you know ;)


Stu Aull
80GS
Alaska

engen 07-26-14 06:27 PM

Thanks for the response! I'll start looking for another one. I have a feeling I will spend a good bit of time trying to figure out what happened to begin with though.

engen 07-27-14 10:00 PM

I have run into a problem. To me, it does not look like there is a connector that connects the rear harness to the main harness. Am I missing something? Here is what i see.

https://www.rx7club.com/members/enge...ness-58715.jpg

And of course I found more damage further up the harness.

https://www.rx7club.com/members/enge...ness-58714.jpg


All times are GMT -5. The time now is 02:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands