RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   What's this Connector? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/whats-connector-900368/)

Rotaryfreak702 04-26-10 04:36 PM

What's this Connector?
 
1 Attachment(s)
Does anyone have any idea of what this connector is for. It leads from somewhere under the passenger side of the car and the other end is combined with the injector harness.

Car is '84 -SE.

SPERRYsan 04-26-10 05:33 PM

o2 sensor i think

AcidAngel7477 04-26-10 05:45 PM

yep..o2 sensor..and it look's like it just came undone..

:AA:

hoang5659 04-26-10 06:19 PM

sorry for jacking this thread but i have a quick question. i have an 85 SE and just replaced the exhaust system with the RB street port exhaust. there was no provision for the O2 sensor so i took it off. will there be any adverse effects from not having an O2 sensor? again, sorry for asking an off topic question. thanks in advance...

hoang

AcidAngel7477 04-27-10 12:55 AM

^^ if your not running emission's then i wouldent worry about it.

:AA:

Crit 04-27-10 02:58 AM

Well, you'll get better mileage with it connected. I've got a cheapo A/F gauge and can watch the crossing counts as the car alternates between rich and lean under moderate load. Without the O2 sensor, it just stays rich.


All times are GMT -5. The time now is 12:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands