RX7Club.com - Mazda RX7 Forum
Page 3 of 3
1
2
3
Show 50 post(s) from this thread on one page

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Weber 48IDA on Stockport 12a (https://www.rx7club.com/1st-generation-specific-1979-1985-18/weber-48ida-stockport-12a-819863/)

Jeezus 05-15-09 01:40 PM
Originally Posted by Hyper4mance2k (Post 9210775)
Jeezus. Clear out your PM inbox and your sent items. I'm posting my reply to your PM here.
Goodnight.


yea that's about right. you might be able to go smaller on the mains stay between 170-200 and keep the air correctors between 120-170. It all depends on how strong your engine still is, and your elevation, how humid your area is. That's why noone can just give you a gaurenteed setup. $35 shipped for the e-tubes.
Engine is still very strong, has 20k on it, pulls like a banshee.

I will get 170 mains and 130 airs, then just drill from there.

Jeezus 05-15-09 01:50 PM
Do I need to get an Idle jet holder? I have never heard of that.

Jeezus 05-15-09 03:39 PM
Well, went ahead and ordered everything :)

Too bad it will take a while to get it here. This weekend is the Coca-Cola 600, and our family comes up to go to the races. There is an 86 year old guy who rebuild bugeyes and Austin Healey engines and carbs. He is the freakin MASTER at tuning anything, especially webers :D

racerlinkfc 05-15-09 03:43 PM
Originally Posted by Jeezus (Post 9212085)
Well, went ahead and ordered everything :)

Too bad it will take a while to get it here. This weekend is the Coca-Cola 600, and our family comes up to go to the races. There is an 86 year old guy who rebuild bugeyes and Austin Healey engines and carbs. He is the freakin MASTER at tuning anything, especially webers :D
i know somebody with a 13b turbo blowthrough in a bugeye :) hemm...rob

n0ferz 05-15-09 03:56 PM
Originally Posted by Jeezus (Post 9212085)
Well, went ahead and ordered everything :)

Too bad it will take a while to get it here. This weekend is the Coca-Cola 600, and our family comes up to go to the races. There is an 86 year old guy who rebuild bugeyes and Austin Healey engines and carbs. He is the freakin MASTER at tuning anything, especially webers :D
From where did you placed your order and what did you order if you dont mind me asking? I just bought a 48 IDA from ebay and I have a stockport 12a just like you, so I think my setup will be pretty much like yours. :)

Jeezus 05-15-09 07:58 PM
Originally Posted by n0ferz (Post 9212148)
From where did you placed your order and what did you order if you dont mind me asking? I just bought a 48 IDA from ebay and I have a stockport 12a just like you, so I think my setup will be pretty much like yours. :)
I went to pierce manifolds. They have a email form you send them. Very good guys, talked to them on the phone and whatnot. Here is what I ordered. I did not include the E-tubes, as that is what I will get from Hyper.

http://i40.tinypic.com/2pt7wx1.jpg

n0ferz 05-15-09 11:36 PM
Thank u Jeezus, i will save this for future reference :)

Siraniko 05-16-09 09:22 AM
Originally Posted by n0ferz (Post 9212148)
From where did you placed your order and what did you order if you dont mind me asking? I just bought a 48 IDA from ebay and I have a stockport 12a just like you, so I think my setup will be pretty much like yours. :)


now do a search under my SN for a very way to modify the IDA :lol::lol::lol:

n0ferz 05-16-09 11:48 AM
Originally Posted by wackyracer (Post 9213616)
now do a search under my SN for a very way to modify the IDA :lol::lol::lol:
wow I am reading that thread and that sucks what happened to you man...sorry to hear that.

mpk490p 05-18-09 09:50 AM
Originally Posted by Jeezus (Post 9212621)
I went to pierce manifolds. They have a email form you send them. Very good guys, talked to them on the phone and whatnot. Here is what I ordered. I did not include the E-tubes, as that is what I will get from Hyper.

http://i40.tinypic.com/2pt7wx1.jpg
why are you buying 2 needle valves?:dunno:

Jeezus 05-18-09 12:08 PM
Originally Posted by mpk490p (Post 9218117)
why are you buying 2 needle valves?:dunno:
I wrote down parts numbers first then just put 2 for everything. DOH!

I haven't sent it out yet though. Thanks for the catch :)

boricuasinmiedo 11-29-09 05:25 PM
Jeezus how did it go with your set up r you good?

KarateKID1194 07-15-17 08:59 PM
Originally Posted by Jeezus (Post 9218402)
I wrote down parts numbers first then just put 2 for everything. DOH!

I haven't sent it out yet though. Thanks for the catch :)
Sorry for resurrecting a long-dead thread but how did this set up end up going? Considering going 48 IDA on my stockport 12a... :)

Gian 07-19-17 12:43 AM
Originally Posted by KarateKID1194 (Post 12200489)
Sorry for resurrecting a long-dead thread but how did this set up end up going? Considering going 48 IDA on my stockport 12a... :)
Do it. You will not be sorry.

Frogman 07-19-17 10:56 PM
Whow 35 mpg!?!?! How! Lmao

rxtasy3 07-19-17 11:16 PM
no way i could get 35 mpg. i like feeling the power too much.

Jeezus 07-24-17 06:46 AM
Originally Posted by KarateKID1194 (Post 12200489)
Sorry for resurrecting a long-dead thread but how did this set up end up going? Considering going 48 IDA on my stockport 12a... :)
Never got to run it, traded it for a boost prepped 45 DCOE, sorry bud.


All times are GMT -5. The time now is 09:17 PM.
Page 3 of 3
1
2
3
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands